Enabling/Disabling Voice Activated Intercom; Setting Intercom Vox Sensitivity; Enabling/Disabling Voice Prompts - Sena NS10 User Manual

Enable / Disable
Tap the (+) Button or the (-) Button until you hear a voice prompt, "VOX phone". If this feature is enabled, you can answer
incoming calls by simply saying a word loudly enough, unless you are connected to intercom. For example, when you
hear a series of beeps for an incoming call, you can answer the phone by saying "Hello" or any other word loudly.
However, the phone VOX feature does not work if you are connected to intercom. This is enabled from the factory but you
can disable this. If this mode is disabled, you have to tap the Center Button to answer an incoming call.

3.6 Enabling/Disabling Voice Activated Intercom

Voice Prompt
Factory Default
Enable / Disable
Tap the (+) Button or the (-) Button until you hear a voice prompt, "VOX intercom". If this feature is enabled, you can
initiate an intercom conversation with the last connected intercom friend by speaking any word loudly enough. If you start
an intercom conversation by VOX, the intercom terminates automatically when you and your intercom friend remain silent
for 20 seconds.

3.7 Setting Intercom VOX Sensitivity

Voice Prompt
Factory Default
Level Adjustment
Apply
Tap the (+) Button or the (-) Button until you hear a voice prompt, "VOX sensitivity". By tapping the Center Button, it will
lead you to the level adjustment mode. If you enter the mode, you will hear a prompt saying the current VOX sensitivity
level. You may adjust the VOX sensitivity level by tapping (+) or (-) Button. The level of 5 is the highest sensitivity setting
and 1 the lowest. After you have completed the setting, tap the Center Button to apply the changes.

3.8 Enabling/Disabling Voice Prompts

Voice Prompt
Factory Default
Enable / Disable
Tap the Center Button
"VOX intercom"
Disable
Tap the Center Button
"VOX sensitivity"
3
Tap (+) or (-) Button (1 ~5)
Tap the Center Button
"Voice prompt"
Enable
Tap the Center Button
5
| NS10