Enabling/Disabling Voice Activated Phone Answering; Enabling/Disabling Voice Activated Intercom - Sena SMH10 User Manual

SMH10 SMH10
The voice prompt for each menu item is as below:
(1) VOX Phone
(2) VOX intercom
(3) Voice Prompt
Exit Configuration
Delete All Pairings

9.1 Enabling/Disabling Voice Activated Phone Answering

Voice Prompt
Factory Default
Enable
Disable
If this feature is enabled, you can answer incoming calls by simply
saying a word loudly enough. For example, when you hear a series
16 16
(4) PLC Setting
(5) Delete All Pairings
(6) Exit Configuration
VOX Phone
VOX intercom
Voice Prompt
PLC Setting
" VOX Phone "
Enable
Tap the Phone Button
Tap the Jog Dial
of beeps for an incoming call, you can answer the phone by saying
"Hello" or any other word loudly. This is enabled from the factory but
you can disable this. If this mode is disabled, you have to tap the Jog
Dial or the Phone Button to answer an incoming call.

9.2 Enabling/Disabling Voice Activated Intercom

Voice Prompt
Factory Default
Enable
Disable
If this feature is enabled, you can initiate an intercom conversation
with the last connected intercom friend by speaking any word loudly
enough.The most effortless way to trigger intercom VOX is to blow
into the microphone as if blowing dust off the microphone. If you
start an intercom conversation by VOX, the intercom terminates
automatically when you and your intercom friend remain silent for 20
seconds. However, if you manually start an intercom conversation by
tapping the Jog Dial, you have to terminate the intercom conversation
manually.
However, even when this feature is enabled, if you terminate intercom
conversation manually with the Jog Dial, you are not able to start
" VOX intercom "
Disable
Tap the Phone Button
Tap the Jog Dial