Enabling/Disabling Voice Activated Phone Answering; Enabling/Disabling Voice Activated Intercom - Sena SPH10S User Manual

SPH10S
The voice prompt for each menu item is as below:
(1) VOX phone
(2) VOX intercom
(3) Voice prompt
VOX phone
Exit configuration
Delete all pairings
PLC setting
9.1 Enabling/Disabling Voice Activated Phone
Answering
Voice Prompt
Factory Default
Enable
Disable
If this feature is enabled, you can answer incoming calls
by simply saying a word loudly enough. For example,
when you hear a series of beeps for an incoming call,
12
(4) PLC setting
(5) Delete all pairings
(6) Exit configuration
VOX intercom
Voice prompt
"VOX phone"
Enable
Tap the Phone Button
Tap the Jog Dial
you can answer the phone by saying "Hello" or any
other word loudly. This is enabled from the factory but
you can disable this. If this mode is disabled, you have
to tap the Jog Dial or the Phone Button to answer an
incoming call.
9.2 Enabling/Disabling Voice Activated
Intercom
Voice Prompt
Factory Default
Enable
Disable
If this feature is enabled, you can initiate an intercom
conversation with the last connected intercom friend
by speaking any word loudly enough. The most
effortless way to trigger intercom VOX is to blow into
the microphone as if blowing dust off the microphone.
If you start an intercom conversation by VOX, the
intercom terminates automatically when you and your
intercom friend remain silent for 20 seconds. However,
if you manually start an intercom conversation by
tapping the Jog Dial, you have to terminate the intercom
conversation manually.
"VOX intercom"
Disable
Tap the Phone Button
Tap the Jog Dial