Table of Contents
Advertisement
SPH10
2. Within 2 seconds, tap the Jog Dial again, then
the LED turns to red flashing and the beeps turn
to double mid-tone beeps. You will hear a voice
prompt saying "Media selective pairing".
3. Search for Bluetooth devices on your smartphone.
Select the Sena SPH10 in the list of devices detected
on your phone.
4. Enter 0000 for the PIN. Some smartphones may
not ask for PIN.
7.2 HFP for Phone Call Only
1. Turn on the headset and press the Phone Button
for 5 seconds until the LED flashes red and blue
alternately and you hear multiple beeps.
2. Within 2 seconds, tap the Phone Button again,
then the LED turns to blue flashing and the beeps
turn to multiple mid-tone beeps. You will hear a
voice prompt saying "Phone selective pairing".
3. Search for Bluetooth devices on your smartphone.
Select the Sena SPH10 in the list of devices
detected on your phone.
4. Enter 0000 for the PIN. Some smart phones may
not ask for PIN.
16
8. INTERCOM PAIRING
8.1 Pairing with Other SPH10 Headsets for
Intercom Conversation
The SPH10 can be paired with up to three other
headsets for Bluetooth intercom conversation.
1. Turn on the two SPH10 headsets (A and B) that you
would like to pair with each other.
2. Press and hold the Jog Dial of the headset A and B
for 5 seconds until red LEDs of the both units start
to flash rapidly. You will hear a voice prompt saying
"Intercom pairing".
3. Simply tap the Jog Dial of any one of the two
headsets A or B (It doesn't matter that you choose A
or B.) and wait until the LEDs of both headsets turn
to blue and intercom connection is automatically
established. The two SPH10 headsets A and B are
paired with each other for intercom conversation.
If the pairing process is not completed within one
minute, the SPH10 will return to stand-by mode.
Advertisement
Table of Contents
