Page 1
SMH5 Bluetooth ® Headset & Intercom for Scooters & Motorcycles User's Guide www.SenaBluetooth.com...
Page 2
These trademarks may not be used without the express permission of Sena. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone, iPod touch are the registered trademark of Apple Inc. Zumo™ is a trademark of Garmin Ltd. or its subsidiaries. TomTom™ is the trademark or...
SMH5 CONTENTS 1. INTRODUCTION ..................5 8. PAIRING WITH OTHER SMH5 HEADSETS FOR INTERCOM CONVERSATION .................16 2. PACKAGE CONTENTS .................6 9. PAIRING WITH OTHER SENA HEADSET MODELS FOR 3. INSTALLING THE SMH5 ON YOUR HELMET ........7 INTERCOM CONVERSATION.............17 4. POWERING ON/OFF AND CHARGING ..........10 10.
Page 4
SMH5 11.10 Music Sharing .................. 25 PRODUCT WARRANTY AND DISCLAIMER ...........33 11.11 Reset to Factory Default Settings ............ 25 Limited Warranty ..................33 11.12 Fault Reset ..................26 Warranty Exclusions .................. 34 Warranty Service ..................36 12. UNIVERSAL INTERCOM ..............26 Return for Full Refund ................
Thank you for choosing the Sena SMH5, Bluetooth Stereo Headset • Bluetooth stereo headset for Bluetooth GPS navigations and Intercom for scooters and motorcycles. With the SMH5, you can • Bluetooth intercom up to 400 meters (430 yards)* call handsfree on your Bluetooth mobile phone, listen to stereo music •...
SMH5 2. PACKAGE CONTENTS • Clamp Unit • Headset Main Unit • Helmet Speakers • Microphone •Charging LED - Basic Kit • Attachable Boom Microphone • Velcro Pad for Boom Microphone Jog Dial Phone Button • Attachable Boom Microphone Holder DC Power Charging &...
SMH5 3. INSTALLING THE SMH5 ON YOUR HELMET - Full-face Helmet Kit 1. Loosen the two screws on the back plate of the clamp using the • Wired Microphone enclosed Allen Wrench. Insert the back plate of the clamp unit between the internal padding and external shell of the helmet, and tighten the two screws.
Page 8
Sena recommends the clamp unit over the glued surface mounting plate. Even though the glued surface mounting plate is provided for convenience, Sena does not assume any responsibility for use of it. Users may have to use the glued plate at their own risk and responsibility.
Page 9
SMH5 6. When you use the boom microphone included in the “Basic Kit”, please make sure that the fin side of the microphone is facing outward; away from your lips. You can easily recognize it by touching the fin with your fingers. In the case of the wired microphone included in the “Full-face Helmet Kit”, attach the enclosed velcro pad for wired microphone...
SMH5 Note: 4. POWERING ON/OFF AND CHARGING Be sure to connect the speaker cable securely to the main unit. It is strongly recommended that you insert the cable tightly into the connector housing while holding the main unit. To power on and off the headset, you don’t need to press and hold any button for several seconds.
4.3 Charging 5. CHECKING THE BATTERY LEVEL • To charge the SMH5, use the USB Power & Data Cable included in the package by plugging into computer’s USB port or USB wall charger. USB wall charger is not included in the package, but you You can check the battery level in two different ways when the can use any USB wall charger in the market.*...
4. The mobile phone confirms that pairing has completed and the DEVICES SMH5 is ready to use. You will hear a voice prompt from the SMH5 saying “Your headset is paired”. Before using the SMH5 Bluetooth headset with any of Bluetooth 5.
6.3 Bluetooth GPS Navigation Pairing 6. The mobile phone confirms that pairing has completed and the SMH5 is ready to use. You will hear a voice prompt from the SMH5 You can listen to voice instruction from Bluetooth GPS navigation. saying “Your headset is paired”.
5. The GPS confirms that pairing has completed and the SMH5 is 6.3.2 GPS Pairing as Mobile Phone ready to use. You will hear a voice prompt from the SMH5 saying If GPS is not only used for turn-by-turn voice instructions but also is “Your headset is paired”.
You will hear a voice prompt saying “Phone selective pairing”. phone and SMH5. To clear the pairing list on SMH5, please do a 3. Search for Bluetooth devices on your smartphone. Select the Sena factory reset described on the page 19.To clear the pairing list on...
The SMH5 can be paired with up to three other headsets for Bluetooth Intercom conversation. 1. Turn on the two SMH5 headsets (A and B) that you would like to pair with each other. 2. Press and hold the Jog Dial of the headset A and B for 5 seconds Pairing A &...
3. You can enable the feature or execute the command by tapping 9. PAIRING WITH OTHER SENA HEADSET the Phone Button, or disable the feature by tapping the Jog Dial. 4. If any button is not pressed within 10 seconds, the SMH5 will exit MODELS FOR INTERCOM CONVERSATION the configuration and goes back to stand-by mode.
Phone Button to confirm. You will then hear a voice prompt saying “Cancel”. If any button is not pressed within 1 minute, the Delete all pairings Voice prompt SMH5 will exit the configuration menu and go back to stand-by mode. Sidetone Note: 10.1 Assigning Speed Dial...
Tap the Phone Button Disable Tap the Jog Dial To delete all Bluetooth pairing information of the SMH5, rotate the Jog Dial until you hear a voice prompt saying “Delete all pairings”, and You can disable voice prompts by configuration setting, but the tap the Phone Button to confirm. Taping the Jog Dial is not available...
SMH5 10.6 Exit Voice Configuration Menu 11. USING THE SMH5 Voice Prompt “Exit configuration” Factory Default 11.1 Volume Adjustment Enable Tap the Phone Button You can easily adjust the volume by rotating the Jog Dial. You will To exit voice configuration menu and get back to stand-by mode, hear a beep when the volume reaches maximum or minimum level.
SMH5 11.3 Speed Dialing 5. To transfer a call between the mobile phone and the headset during the phone conversation, press the Phone Button for 2 seconds You can quickly make a phone call by using the voice speed dial until you hear a beep.
Phone Button or the Jog Dial. If any button is not pressed within 15 by tapping the Jog Dial: single tapping to intercom with the first seconds, the SMH5 will exit the voice speed dial menu and goes intercom friend, double tapping with the second intercom friend, and triple tapping with the third intercom friend.
Jog Dial for 2 seconds until you hear a beep. will be disconnected. In this case, the SMH5 automatically tries to Unlike other motorcycle Bluetooth headsets, this prevents a reconnect the intercom every 8 seconds.
• To play or pause music, press and hold the Jog Dial for 1 second until you hear a double beep. You can listen to stereo music by Bluetooth wireless stereo. The Bluetooth audio device must be paired with the SMH5 by following the Bluetooth Stereo Device Pairing instructions described in the previous chapter. The SMH5 supports the Audio/Video Remote Control Profile (AVRCP), so if your Bluetooth audio device also supports the AVRCP, you can use the SMH5 to remotely control music playback.
11.11 Reset to Factory Default Settings call. 1. To restore the SMH5 to factory default settings, press and hold the 11.10 Music Sharing Phone Button for 12 seconds until the LED shows solid red and you You can start sharing music with an intercom friend using Bluetooth hear high tone double beeps.
1. Turn on the SMH5 and a non-Sena Bluetooth headset which you want to pair with. 2. Press and hold the Jog Dial on the SMH5 for 8 seconds until the blue LED flashes rapidly. You will hear a voice prompt saying...
13. FIRMWARE UPGRADE Sena Bluetooth headset (refer to the users’ manual of the headsets you want to use). The SMH5 will automatically perform pairing with non-Sena Bluetooth headsets in pairing mode. The SMH5 supports firmware upgrade function. Please visit Sena 12.2 Two-way Universal Intercom...
This product is CE marked according to the provisions of the R&TTE However, there is no guarantee that interference will not occur in a particular Directive (99/5/EC). Hereby, Sena declares that this product is in installation. If this equipment does cause harmful interference to radio or...
Bluetooth SIG, Inc. human health from uncontrolled waste disposal, please do not dispose and any use of such marks by Sena is under license. Other trademarks of these products as unsorted municipal waste, but hand it in at an and trade names are those of their respective owners.
SMH5 SAFETY INFORMATION Product Use • In some regions, it is prohibited by law to ride motorcycles or bicycles Please ensure that the product is properly used by observing the warnings while wearing headsets. Therefore be certain to comply with all and cautions below to prevent any risk and/or damage to property.
SMH5 • When using the product, drive at a low speed (slower than 35km/h) for • Store the battery at temperatures of 15°C~25°C (59°F~77°F). Higher safety. In addition, be certain to conform to laws regarding the use of or lower temperatures may reduce the capacity and life of the battery, communications devices while driving.
Use of this product will constitute consent to this agreement, only. Sena will not be liable for any loss, damage of human life, or loss of and forfeiture of rights to all claims. If you do not consent to all the terms property which may result from using the product beyond defective parts and conditions of this agreement, return the product for a refund.
Further, Sena will not be liable for any substantial • Use of the product on the road may cause such risks as fracture, damage not related to the, condition, environment, or malfunction of the serious disability, or death.
Page 35
In addition to damages which may occur due to the use of the product, ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN Sena will not be liable for damages of the product which occur due to the CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, following events.
Sena will not be liable for any claim for damages related with Free-of-charge Service Sena will provide free-of-charge repair or replacement service for the the product.
Page 37
SMH5 1.4.0 www.SenaBluetooth.com User's Guide for Firmware v2.0...
Need help?
Do you have a question about the SMH5 and is the answer not in the manual?
Questions and answers