Control A Far End Camera - Cisco DX70 Administrator's Manual

Hide thumbs Also See for DX70:
Table of Contents

Advertisement

Cisco DX70 and DX80
Introduction

Control a far end camera

Sign in to the web interface and navigate to
Prerequisites
While in a call, you can control the remote participant's camera
(far end) provided that:
The
Conference > FarEndControl > Mode
On on the far end video system.
The far end camera has pan, tilt or zoom functionality. Only
the relevant controls will appear.
Speaker tracking is not switched On on the far end camera.
The local video system has the Remote Monitoring option.
D15362.06 DX70 and DX80 Administrator Guide CE9.2, NOVEMBER 2017.
Configuration
Peripherals
Call
Control.
setting is switched
Control the remote participant's camera
1. Click the camera icon to open the remote
camera control window.
2. Use the left and right arrows to pan the
camera; the up and down arrows to tilt it; and
+
and
-
to zoom in and out.
If you are not allowed to control the far end
camera, the controls will not appear in the
image.
If the call is encrypted, the far end snapshot
behind the controls are not displayed.
Maintenance
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
139
Administrator Guide
System settings
Appendices
Appendices

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dx80

Table of Contents