Revert To The Previously Used Software Image - Cisco DX70 Administrator's Manual

Hide thumbs Also See for DX70:
Table of Contents

Advertisement

Cisco DX70 and DX80
Introduction

Revert to the previously used software image

Sign in to the web interface and navigate to
System
Recovery.
Note: You can only revert to another CE software version using
this procedure, for example from CE8.3.y to CE8.2.x.
If you want to convert back to Android-based software, refer to
the
► Upgrade the system software
chapter.
D15362.06 DX70 and DX80 Administrator Guide CE9.2, NOVEMBER 2017.
Configuration
Peripherals
Maintenance >
We recommend you to back up the log files and configuration
of the video system before you swap to the previously used
software image.
Back up log files and system configuration
1. Select the Backup tab.
2. Click
log files on your computer.
3. Click
instructions to save the configuration file on your computer.
Revert to the previously used software image
Only administrators, or when in contact with Cisco technical
support, should perform this procedure.
1. Select the Software Recovery Swap tab.
2. Click
software version.
3. Click
changed your mind.
Wait while the system resets. The system restarts automatically
when finished. This procedure may take a few minutes.
Maintenance
Maintenance
Download Logs
and follow the instructions to save the
Download Configuration Backup
and follow the
Switch to software:
cex.y.z..., where x.y.z indicates the
Yes
to confirm your choice, or
Cancel
if you have
59
Administrator Guide
System settings
About the previously used
software image
If there is a severe problem with the video
system, switching to the previously used
software image may help solving the
problem.
If the system has not been factory reset
since the last software upgrade, the
previously used software image still
resides on the system. You do not have to
download the software again.
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
Appendices

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dx80

Table of Contents