Upgrade The System Software - Cisco DX70 Administrator's Manual

Cisco DX70 and DX80

Introduction

Upgrade the system software

Convert between Android-based software and
CE software
From Collaboration Software version 8.2 (CE8.2) all DX80 and
DX70 units can run CE software, which is the same software that
runs on the Cisco TelePresence SX and MX Series.
Cisco DX80 and Cisco DX70 were originally shipped with Android
based software, but will later on be shipped with CE software.
Before converting to CE software, it is important to carefully
consider the conversion requirements and the functionality
changes compared to Android based software.
The CE software on DX devices does not support the following
features in CE9.1:
• 3 party app installation
rd
• Keyboard control, keyboard and mouse redirect
Refer to the Software Release Notes for further information.
Find a detailed description about how to convert from Android-
based software and CE software, and vice versa, in the Cisco
DX70 and DX80 Convert between CE and Android based
software guide available under Install and Upgrade Guides
► https://www.cisco.com/go/dx-docs
D15362.06 DX70 and DX80 Administrator Guide CE9.2, NOVEMBER 2017.
Configuration Peripherals
(page 1 of 2)
Upgrading from CE8 to CE9
The MultiStream feature with Cisco TelePresence Server is
deprecated in CE9.
Also, some features that were available from the touch interface in
CE8, are not available in the first CE9 releases. Read the release
notes for details before you upgrade.
at
Maintenance Maintenance
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
51
Administrator Guide
System settings Appendices