Video Input Connector [1; Video Input Connector [2] Quality; Video Input Connector [2] Rgbquantizationrange; Video Monitors - Cisco DX70 Administrator's Manual

Hide thumbs Also See for DX70:
Table of Contents

Advertisement

Cisco DX70 and DX80
Introduction

Video Input Connector [2] Quality

When encoding and transmitting video there is a trade-off between high resolution and
high frame rate. For some video sources it is more important to transmit high frame rate
than high resolution and vice versa. This setting specifies whether to give priority to high
frame rate or to high resolution.
Requires user role: ADMIN, INTEGRATOR
Default value: Sharpness
Value space: Motion/Sharpness
Motion: Gives the highest possible frame rate. Used when there is a need for higher
frame rates, typically when a large number of participants are present or when there is a
lot of motion in the picture.
Sharpness: Gives the highest possible resolution. Used when you want the highest
quality of detailed images and graphics.

Video Input Connector [2] RGBQuantizationRange

The devices connected to the video input should follow the rules for RGB video quantization
range defined in CEA-861. Unfortunately some devices do not follow the standard and this
configuration may be used to override the settings to get a perfect image with any source.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
Value space: Auto/Full/Limited
Auto: RGB quantization range is automatically selected based on video format according
to CEA-861-E. CE video formats will use limited quantization range levels. IT video
formats will use full quantization range levels.
Full: Full quantization range. The R, G, B quantization range includes all code values (0 -
255). This is defined in CEA-861-E.
Limited: Limited Quantization Range. R, G, B quantization range that excludes some code
values at the extremes (16 - 235). This is defined in CEA-861-E.
D15362.06 DX70 and DX80 Administrator Guide CE9.2, NOVEMBER 2017.
Configuration
Peripherals
Maintenance
Video Input Connector [1..2] Visibility
Define the visibility of the video input connector in the menus on the user interface.
Note that Connector 1 is the system's integrated camera, which is not available as a
presentation source.
Requires user role: ADMIN, INTEGRATOR
Default value: Connector 1: Never Connector 2: Always Connector 3: OnConnect
Value space: Connector 1: Never Connector 2, 3: Always/IfSignal/Never
Always: The menu selection for the video input connector will always be visible on the
user interface.
IfSignal: Yhe menu selection for the video input connector will only be visible when
something is connected to the video input.
Never: The input source is not expected to be used as a presentation source, and will
not show up on the user interface.

Video Monitors

Define the monitor layout mode. Note that this video system supports only one monitor, so
this value is fixed and cannot be changed.
Requires user role: ADMIN, INTEGRATOR
Default value: Single
Value space: Single
Single: The layout is shown on the video system's monitor.

Video Output Connector [1] Brightness

Define the brightness level for the video system's integrated display.
Requires user role: ADMIN, USER
Default value: 80
Value space: Integer (0..100)
Range: The value must be between 0 and 100.

Video Output Connector [2] CEC Mode

The HDMI output (Output Connector 2) is for future use.
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
126
Administrator Guide
System settings
System settings
Appendices

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dx80

Table of Contents