2
Changing Assembly Parts
10
2.5
Changing the Printhead
Changing a printhead can be completed without fine adjustments to the printer. Changing the printhead is necessary
when it is worn or a change of printing resolution is needed.
3
Fig. 4
Assembly of the printhead
!
Attention!
Damaging the printhead by electrical discharge or mechanical influences!
Set up the printer on an grounded conduit.
Ground yourself with e.g. an anti static bracelet.
Do not touch the connectors (1, 2).
Do not touch the heating element (4) with hands or hard objects.
1
2
4
1 Connector data
3
2 Connector power
3 Threaded holes
4 Heating element
10