Perform a media registration for large media - Adjust the Z-
position of side 2
Procedure
1. Take the first test sheet.
2. Align the start of the ruler with point 'K' of the test sheet.
[63] Align the ruler with 'K'
3. Read the value at the edge of the test sheet.
4. Enter the value.
5. Take the second test sheet.
6. Repeat the steps 2 - 4.
7. Take the third test sheet.
8. Repeat the steps 2 - 4.
NOTE
After step 8, the machine prints another 3 test sheets to measure the X-position of side
1 and side 2.
Océ VarioPrint 6000 line
Perform a media registration for large media - Adjust the Z-position of side 2
Chapter 11 - Media handling
233