The Paper Modules - Oce VarioPrint 6180 User Manual

The paper modules

Introduction
The paper trays contain the media that are required for the print jobs. The default configuration of
the machine contains 1 paper module with 4 paper trays.
• Two standard trays with a capacity of 600 sheets each.
• Two bulk trays with a capacity of 1,700 sheets each (or 3,400 A4/Letter sheets each when the
optional dual paper trays are installed)
Contact your local authorized dealer for more information about the dual paper trays.
You can add 1 or 2 more paper modules to the machine. Then the total number of paper trays is
extended to 8 or 12 respectively. You can find more information about the capacities of the paper
trays and the supported media size in the specification chapter of this manual.
You can also install a Flex-XL PIM paper input module. In this paper module the two bulk trays
are replaced by Flex-XL trays. A Flex-XL tray can contain media until media size 350 mm x 500
mm. You can install the Flex-XL PIM instead of a standard paper module or in combination with a
standard paper module. You can install a maximum of 3 paper modules. Contact your local
authorized dealer for more information about the Flex-XL PIM. See also
module on page
This section describes the control panel on each paper module.
NOTE
You can use the control panel on the paper modules to open the paper trays and load the media.
However, the recommended way to open the paper trays and assign the media is via the
[Schedule] view. You can also open the paper trays and/or assign the media via the [Trays] view
Assign the media to a paper tray on page
(see
The control panel
1
1
2
2
3
4
[1] The control panel on the paper modules
Each paper module contains a control panel next to the upper paper tray. The control panel
consists of 4 sections that correspond with the 4 paper trays. Each section displays the current
filling level of the corresponding paper tray. Furthermore, the control panel indicates whether the
media in the paper tray is assigned or not. The following table describes the various parts of the
control panel.
Océ VarioPrint 6000 line
29.
5
3
4
212).
Chapter 2 - Explore the print system
The paper modules
Flex-XL paper input
19