Quick Reference Guide - Directed DS4+ Installation Manual

Quick Reference Guide

Sending commands to your vehicle
Whether you want to remote start the engine, lock/unlock the doors or pop the trunk,
there are 3 possible ways you can send commands to your vehicle, using the:
• Factory remote.
• Aftermarket remote.
• Directed SmartStart application via your smartphone.
If applicable, you can also start the engine remotely by pressing the Lock button 3
times quickly on your factory remote.
Vehicle takeover
The vehicle takeover feature is not available in this firmware. The vehicle engine will
shut down as soon as a door is opened.
Pit stop/idle mode
Stop the vehicle in a safe parking spot and put the
1
gear in Park (P).
Press the Remote Start button on the transmitter.*
2
The parking lights will flash once to indicate the
vehicle is now in Pit Stop Mode.
It is safe to leave the engine running and exit the
vehicle with the factory remote in hand.
3
Note: We recommend that you always lock the
doors of your vehicle when leaving it unattended.
* Icon and remote appearance may differ depending on the model purchased.
20
List of available commands
Note that the information below is for many Viper, Clifford, Python, Avital, Automate,
Autostart and AstroStart models. Icons and commands may differ depending on the
model and options purchased. Refer to your authorized installation center for more
specific information.
Button(s)
* Icon and remote appearance may differ depending on the model purchased.
SmartStart compatible
Put
gear in
Park
This system is equipped with a Bluetooth version of SmartStart offering up to 200' of
range. The simple graphical interface gives you control over the following features of
your installed remote start system or security with remote start system:
14:36
&
• Lock/Arm
Parking lights flash x1
Press Remote
Start button*
• Unlock/Disarm
• Remote Car Starter
• Trunk Release
• Panic
14:36
Exit vehicle
• AUX Channels
with remote
You can also control multiple vehicles – great for families – and assign more than
one user to control a vehicle. It's easy with SmartStart! But, this is only the beginning!
SmartStart is loaded with additional features including GPS tracking, SmartSchedule,
vehicle status, roadside assistance, parked car finder and more.
The application enables a "Cloud-Connected Car" like never before, providing
2-way interaction with your vehicle. Connectivity is managed through the Directed
Cloud Services (DCS) network linking car, app, end user, and the Internet.
For more information, visit www.mysmartstart.com.
Actions
Press & hold for 1 second to lock.
Press & hold for 1 second to unlock.
Press & hold for 1 second to remote start.
*
* Press & hold for 5 seconds to activate the trunk release (optional).
933.TL1 5.03.185 2010 Toyota Camry (Smart Key)
© 2017-10-17 Directed. All rights reserved.