B� Units; C� Sample Rate - Sherwood Scuba SAGE Manual

B. UNITS
The Units feature allows you to select whether Imperial (FT, PSI) or Metric (M, BAR) units of measure will be displayed.
SET UNITS
IMPERIAL
IMPERIAL, METRIC
to toggle
selection
C. SAMPLE RATE
The Sample Rate controls how frequently the Sage stores a data snapshot, for later PC Download, during a dive. Setting op-
tions are 2, 15, 30, or 60 second intervals. Shorter intervals will provide a more precise record of your dives.
NOTE: New data will automatically overwrite the oldest data in memory when the memory becomes full. The Sage Log and PC
Download data is stored separately in different partitions of the memory. The Log only stores a short summary of each dive.
Alternately, the PC Download function stores much larger files for each dive. Depending on the chosen settings and dive dura-
tions, it is possible to see dives stored in the Sage's onboard Log that have already been overwritten in the PC Download Parti-
tion. Choosing a longer Sample Rate interval will consume less memory per dive. See the chart below for an estimate of down-
load memory capacity. Remember to download your dives more frequently if you are using a shorter Sample Rate interval.
SET SAMPLE RATE
15 SEC
2, 15, 30, 60 SEC
to toggle
selection
© Pelagic, 2017
to save
setting
to toggle
selection
to save
setting
to toggle
selection
27
AIR/NX & GAUGE
DOWNLOAD MEMORY CAPACITY
SAMPLE RATE MAXIMUM
(seconds)
HOURS
2 8
15 64
30 128
60 256
Doc. No. 12-7864-r06 (8/21/17)
SAGE MANUAL