Compass Menu; Calibrate - Sherwood Scuba SAGE Manual

COMPASS MENU

The Compass Menu allows you to adjust compass accuracy. The different selections will be described in the order they appear in the menu.
NOTE: The Compass Menu can only be accessed while on the surface. During a dive the Sage will use the last saved settings when accessing the
Compass Mode.
2:39
SURF
REF
TIME
283°
W
SW

CALIBRATE

You may need to calibrate the compass from time to time to compensate for any magnetic interference (new batteries, new dive location, or other
surrounding changes). Sometimes the Sage will prompt for a calibration, after a battery change for example. The Calibrate selection in the Compass
Menu allows you to manually initiate a calibration.
To calibrate the Sage, follow the onscreen prompts. Rotate and turn the Sage over in as many different directions as possible until the unit beeps.
ROTATE AND TURN OVER
IN MULTIPLE DIRECTIONS
UNTIL BEEP
© Pelagic, 2017
76°
NE
SET DECLIN
exit
menu
to scroll
up
COMPASS MENU
CALIBRATE
to scroll
down
54
SAGE MANUAL
to select
an option
to step
back
Doc. No. 12-7864-r06 (8/21/17)