Sherwood Scuba SAGE Manual page 16

Alarm Level
• All operations cease.
• The Battery icon and CHANGE BATTERY message appear red.
• The Battery icon flashes for 5 seconds then the unit shuts off.
CHANGE BATTERY
1:39
SURF
TIME
845
GAS 1
AIR
PSI
LOW BATTERY DURING A DIVE
Warning Level
• The Sage functions continue but screen brightness is limited to 60% max.
• The battery icon appears solid upon entry into Surface mode.
Alarm Level
• The Sage functions continue but screen brightness is limited to 60% max.
• The Battery icon appears flashing. 5 seconds after entering Surface mode the Sage will shut down.
LOW BATTERY
26
150
DIVE TIME
0:23
FT
1732
GAS 1
NX 32
PSI
AUDIBLE ALARM
While operating in Dive or Gauge mode, the audible alarm will emit 1 beep per second for 10 seconds when alarms strike. During that time, the
audible alarm can be acknowledged and silenced by pressing the SELECT button.
The audible alarms will not be active if the audible alarm is set to OFF (a Set Alarms setting).
Events that emit (10) beeps >> each sound for ½ sec with ½ sec silence between beeps:
• DIVE, GAUGE - ATR Alarm.
• DIVE, GAUGE - Turn (Pressure)Alarm (Gas 1 ONLY)
• DIVE, GAUGE - End (Pressure) Alarm (GAS 1 ONLY).
• DIVE, GAUGE - Ascent Rate too fast.
• DIVE, GAUGE - Depth Alarm.
• DIVE - Dive Time Alarm.
• DIVE - Reserve Time Alarm.
• DIVE - N2 Bar Graph Alarm.
• DIVE - entry into Decompression.
• DIVE - Conditional Violation.
• DIVE - Delayed Violations 1, 2.
• DIVE, GAUGE - Delayed Violation 3.
• DIVE, GAUGE - entry into Violation Gauge Mode.
• DIVE - PO2 Warning and Alarm.
• DIVE - O2 Warning and Alarm.
• DIVE - Gas Switch Alarm.
Events that emit (3) beeps >> each sound for ½ sec with ½ sec silence between beeps:
• DIVE, GAUGE - Ascent Rate warning.
© Pelagic, 2017 16
SAGE MANUAL
Doc. No. 12-7864-r06 (8/21/17)