Bluetooth; Set Auto Dim - Sherwood Scuba SAGE Manual

5. BLUETOOTH

Within this screen the Bluetooth may be turned ON or OFF. When Bluetooth is turned on it will operate in sniffing mode (searching
for compatible devices) while on the surface. Comunication with your Sage must be initiated with your traditional computer or mobile
device using Diverlog software.
NOTE: When Bluetooth is ON the Bluetooth icon will display on the AIR/NX and GAUGE Main screens. Bluetooth is temporarily deacti-
vated when a dive is started. It will return to sniffing mode when the Sage enters Surface Mode.
SET BLUETOOTH
ON
OFF, ON
to toggle
selection

6. SET AUTO DIM

While underwater the Sage screen dims after a set time interval from the last button press. This is done to reduce distractions during the
dive and to conserve battery power. The Sage allows you to customize the time interval and degree of dimming. This feature may also
be turned off.
SET AUTO DIM
1:00
MIN:SEC
OFF, 0:20 - 2:00
to decrease
value
© Pelagic, 2017
to save
setting
to toggle
selection
to save
setting
available
settings
to increase
value
DIM TO BRIGHTNESS
20%
10% - 60%
to decrease
value
32
SAGE MANUAL
to save
setting
available
settings
to increase
value
Doc. No. 12-7864-r06 (8/21/17)