Quick Disconnect Hose ���������������������������������������������������������������8 Delayed Violation 1 - Sherwood Scuba SAGE Manual

QUICK DISCONNECT HOSE
The Quick Disconnect allows for convenient removal and storage of your Sage console.
Removal
• Turn the locking collar counterclockwise to loosen.
• Then push the hose bayonet fitting towards the Sage and turn it counterclockwise ¼ turn. The hose will release from the console.
Assembly
• Visually inspect the fittings and connection O-ring for damage, corrosion, or deterioration.
WARNING: If damage, corrosion, or deterioration is found, return your Sage to an authorized Sherwood dealer, and DO NOT attempt to use it
until it has received factory prescribed service.
• Line up the Quick Disconnect Hose fitting with the male fitting on the Sage console.
• Then push the two fittings together while turning clockwise ¼ turn.
• Secure the hose by tightening the locking collar clockwise.
O-ring
© Pelagic, 2017 8
SAGE MANUAL
Doc. No. 12-7864-r06 (8/21/17)