Mode; My Info; Dc (Dive Computer) Info - Sherwood Scuba SAGE Manual

MODE

This screen allows you to switch between the AIR/NX and GAUGE modes.
SET MODE
AIR/NX
AIR/NX, GAUGE
to toggle
selection

MY INFO

This screen displays up to 6 lines of personal information. Information must be entered using the PC/Mac/Diverlog interface. The screen shown
below will be displayed until information has been uploaded.
MY INFO
JOHN DOE
+90 111 222 3333
A RH+
CONTACT :
JANE DOE
+90 111 222 4444

DC (DIVE COMPUTER) INFO

Information displayed on the DC Info screen should be recorded and kept with your sales receipt. It will be required in the event that your Sage
requires factory service.
DC INFO
: SAGE
MODEL
: 48302
SERIAL
FIRMWARE : R 1A
LAST CAL : 11.12.16
BT DEVICE NAME :
AB123456
© Pelagic, 2017
to select
option
to toggle
selection
to exit
firmware revision
to exit
date of last
factory calibration
33
SAGE MANUAL
Doc. No. 12-7864-r06 (8/21/17)