Initiating A Dive; Air/Nx Dive Main (No Decompression); Alt 1 - Sherwood Scuba SAGE Manual

INITIATING A DIVE

With the Sage in AIR/NX Mode, a dive will commence upon descending to 5 ft (1.5 m) for at least 5 seconds. Below is a diagram to help you navi-
gate AIR/NX Mode functions.
AIR/NX DIVE MAIN
SAFE MINUTES
87
GAS 1
NX 32
to Switch
Gas Menu

AIR/NX DIVE MAIN (NO DECOMPRESSION)

From the Main screen you can see all critical dive parameters. During a dive an audible alarm may sound and the priority of information displayed
may change. This is to indicate a safety recommendation, warning, or alarm. The following information in this chapter demonstrates and describes
an uneventful dive, in terms of safety. Alarms are described in the Complications section of this chapter.
WARNING: Before diving with the Sage, take time to familiarize yourself with both normal and alarm conditions of operation.
SAFE MINUTES
ascent
26
rate
87
depth
FT
2349
GAS 1
gas #
NX 32
gas mix

ALT 1

This screen simply tells you the ATR Safe Minutes (if not already displayed on the Main screen), depth, ascent rate, max depth, ambient tempera-
ture, and current time of day.
SAFE MINUTES
37
87
MAX
132
FT
11 : 56
50
AM
°F
© Pelagic, 2017
26
DIVE TIME
0:43
FT
2349
PSI
ALT 1
ALT 2 (nitrox only)
Deep Stop Preview
back to Main
Dive Time Remaining
0 - 599 min, all times greater than 599 display
as 599
[Safe Minutes (no deco), O2 Safe Minutes (O2
time), ATR Safe Minutes (air time remaining)
depending on which is the limiting factor]
elapsed
dive time
hr:min
DIVE TIME
0:43
nitrogen
loading
PSI
gas pressure
FT
to access
Compass Mode
to access
Set Brightness*
screen
38
*Set Brightness operates the same during a
dive as on the surface. See p. 18 for further
details.
Doc. No. 12-7864-r06 (8/21/17)
SAGE MANUAL