Table of Contents
Advertisement
Sentinel Pro Installation and Setup Guide
To query data from a network-based Modbus device using ModbusTCP, go to the Configure Device
page and scroll down to the Modbus TCP Settings section. Set the Mode to Master, then click Save
Changes.
The next step is to add a Modbus Zone. Locate the Zone list on the left side of the Device Configure
page. At the top of the list click Add Zone, then select Modbus. See screen picture below:
A Modbus Zone will be added to the bottom of the zone list and the Modbus Zone Configure page will
appear to the right.
32
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Sentinel Pro and is the answer not in the manual?
Questions and answers
How do you add users?
To add users to Sensaphone Sentinel Pro:
1. Go to the "Manage Users" page.
2. Add alarm users to your account.
3. To group users, go to the "Manage user groups" section.
4. Select an existing group or click "Create New Group."
5. Give the group a unique, descriptive name.
6. Click the plus icon to add users from the list of alarm users.
7. You can add an entire user or select individual destinations.
8. Click the red X icon to remove users if needed.
9. Click "Save Group" when finished.
This answer is automatically generated