1. Manuals
  2. Brands
  3. Sensaphone Manuals
  4. Measuring Instruments
  5. WEB600 FGD-W600
  6. User manual

Sensaphone WEB600 FGD-W600 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
W
6
EB
00
USER'S MANUAL
VERSION 2.4
SENSAPHONE
®
REMOTE MONITORING SOLUTIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WEB600 FGD-W600 and is the answer not in the manual?

Questions and answers

Related Manuals for Sensaphone WEB600 FGD-W600

Summary of Contents for Sensaphone WEB600 FGD-W600

  • Page 1 USER’S MANUAL VERSION 2.4 SENSAPHONE ® REMOTE MONITORING SOLUTIONS...
  • Page 2 Every effort has been made to ensure that the information in this document is complete, accurate and up-to-date. Sensaphone assumes no responsibility for the results of errors beyond its control. Sensaphone also cannot guarantee that changes in equipment made by other manufacturers, and referred to in this manual, will not affect the applicability of the information in this manual.
  • Page 3 • To reduce the risk of electric shock, do not disassemble this product, but return it to Sensaphone Customer Service, or another approved repair facility, when any service or repair work is required.
  • Page 4 WEB600 User’s Manual Part 15: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 5 THIS LIMITED WARRANTY CONTAINS SENSAPHONE’S STANDARD TERMS AND CONDITIONS. WHERE PERMITTED BY THE APPLICABLE LAW, BY KEEPING YOUR SENSAPHONE PRODUCT BEYOND THIRTY (30) DAYS AFTER THE DATE OF DELIVERY, YOU FULLY ACCEPT THE TERMS AND CONDITIONS SET FORTH IN THIS LIMITED WARRANTY.
  • Page 6 VALIDITY, INTERPRETATION, PERFORMANCE AND ENFORCEMENT SHALL BE GOVERNED BY AND CONSTRUED IN ACCORDANCE WITH THE LAWS OF THE STATE OF DELAWARE, WITHOUT REGARD TO THE PRINCIPLES OF CONFLICTS OF LAW. Effective date 05/01/2004 PHONETICS, INC. d.b.a. SENSAPHONE 901 Tryens Road Aston, PA 19014 Phone: 610.558.2700 Fax: 610.558.0222...

  • Page 7: Table Of Contents

    INSTALLING THE SENSAPHONE LOCATOR SOFTWARE . . . . . . . . . . . . . . . . . .
  • Page 8 WEB600 User’s Manual CHAPTER 4: USER PROGRAMMING ....27 CONTACT PROGRAMMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 E-MAIL PROGRAMMING .

  • Page 9: Chapter 1: Installation

    CHAPTER 1: INSTALLATION INTRODUCTION Congratulations on your purchase of the Sensaphone Web600 Monitoring System. The system is designed to be an easy, cost–effective, network–based monitoring system to notify you when equipment or conditions go awry. The internet browser–based programming makes the device easy to use from any computer on your network.

  • Page 10: Installation And Configuration

    WEB600 User’s Manual INSTALLATION AND CONFIGURATION PHYSICAL DESCRIPTION The Web600 is housed in a 5.5”w x 3.7”h x 1.4”d enclosure, which can be easily wall mounted. LAYOUT The Web600 has connections for six sensor inputs, an ethernet port, battery backup, and 5VDC power. See figure below: Figure 1: Front Panel Layout of the Web600 1) 5V DC Power Jack...

  • Page 11: Installation

    Chapter 1: Installation INSTALLATION This section provides information on: • Operating environment • Installation • Connecting sensors/Battery backup module • Network Configuration PARTS REQUIRED • Phillips Screwdriver • Cat 5 Patch Cable • Network Hub, Switch, or Router that supports 10 or 100 BASE-T •...

  • Page 12: Connecting Sensors

    This will shield the signal from electrical interference, thereby preventing false readings and/or damage to the unit. For your convenience, Sensaphone has 22 gauge shielded cable available in 50’ lengths (part number FGD-0010). To minimize electrical noise coupling between sensor wires and other wiring, follow the guidelines listed below: •...

  • Page 13: Normally Open / Normally Closed Dry Contacts

    Choose an input and connect the wires to the corresponding screw terminals for that zone. 2.8K and 10K temperature sensors are available from Sensaphone. See Appendix C for part numbers. The figure below shows how to connect a temperature sensor:...

  • Page 14: 4-20Ma Current Loop Transducers

    WEB600 User’s Manual 4–20MA CURRENT LOOP TRANSDUCERS The inputs on the Web600 are compatible with transducers that produce an analog output current of 4 to 20mA. Such transducers are available to measure tank and well levels, extreme temperatures, air pres- sure, water pressure, flow, voltage, current, rotational speed, etc.

  • Page 15: Battery Backup (Optional)

    By default the Web600 will try to acquire an IP address automatically using DHCP. If it is suc- cessful you can then use the Sensaphone Locator program to find the Web600 on your network and then assign it a fixed IP address. The network configurations page can be found on the Network tab within the Setup page.
  • Page 16 WEB600 User’s Manual Configuration page Network Configuration using a Static IP Address: If your network does not support DHCP then your Web600 will set its IP address to 192.168.1.250. This address should only be temporarily set. Leaving this address as the factory default could result in net- working conflicts if another Web600 is added to your network.

  • Page 17: Network Parameter Descriptions

    Chapter 1: Installation NOTE: It is highly recommended that you consult all network configurations and settings changes with your Network Administrator. Once you have access to the Network Configuration page change the DHCP Status to Disabled and enter a permanent fixed IP address. Enter the other network settings also. Consult with your network admin- istrator if your unsure of the proper settings.

  • Page 18: Installing The Sensaphone Locator Software

    WEB600 User’s Manual INSTALLING THE SENSAPHONE LOCATOR SOFTWARE The Sensaphone Locator software is used to find your WEB600 on your network. This is convenient when your WEB600 was configured using DHCP since it will tell you the IP address that was assigned to your WEB600 and provide a Connect button to open a web browser window to the device’s web page.

  • Page 19: Using The Sensaphone Locator Software

    Pressing the Search button will rescan your network for any Sensaphone devices that may be connected. Your specific device can be identified by using the MAC Address field of the Sensaphone Locator, which will be identical to your serial number. Click on your device within the Sensaphone Locator application and click the Connect button.

  • Page 20: Chapter 2: System Configuration

    WEB600 User’s Manual CHAPTER 2: SYSTEM CONFIGURATION INTRODUCTION The WEB600 is completely programmable from the internal webpage. This makes it easy to setup, program, and utilize the features of the device. The webpage can be accessed by opening your internet browser (Internet Explorer, Firefox, Safari, …) and entering the IP address of your WEB600 (see the Network Configuration section in Chapter 1 for assistance).

  • Page 21: Network

    Chapter 2: System Configuration sages to all profiles at priority level 1. Then it will wait the duration of the Escalation Delay and send messages to priority level 2, as long as the alarm still exists, and so on with priority 3, 4, 5,…. If the alarm no longer exists, those profiles who have higher escalation levels will not be contacted.

  • Page 22: Smtp

    Note that the Web600 will not work with SMTP servers that require TLS or SSL encryption. As a result, it will not work with web-based e-mail providers such Gmail, Hotmail, Yahoo!Mail, or AOL. If you do not have a compatible SMTP server available to you then contact Sensaphone Technical support for other options.

  • Page 23: Modbus

    Chapter 2: System Configuration Zone 5 Value .1.3.6.1.4.1.8338.1.1.4.1.1.1.7.48 Zone 6 Value .1.3.6.1.4.1.8338.1.1.4.1.1.1.8.48 The complete WEB600 OID information is available in Appendix E. MODBUS® The WEB600 can be accessed via Modbus®TCP protocol and function as a slave device. To use this fea- ture select the desired Modbus®...

  • Page 24: Chapter 3: Zone Programming

    WEB600 User’s Manual CHAPTER 3: ZONE PROGRAMMING This chapter explains how to program the Zone Inputs for monitoring and alarming based on your requirements. The WEB600 features numerous settings for customizing the operation of the device. To begin, click on Zones from the menu bar. The following screen will appear: Zones page The Zone Programming page displays each of the six Zones, as well as Battery and Power monitoring.
  • Page 25 Chapter 3: Zone Programming Units: The Units field is used to describe the units of measure for the value being monitored. When Temperature is selected the Units field will automatically display F (Fahrenheit) or C (Celsius). When a 4-20mA type is selected you can enter the appropriate text for the monitored condition (e.g. %RH, PSI, GPM, RPM,…).
  • Page 26 WEB600 User’s Manual Alarm Delivery Schedule: This weekly schedule sets the time period(s) when alarm delivery will be active for the selected zone. The schedule is divided into half-hour increments over the seven weekdays. A check mark indicates that alarm delivery is active for that time period. Zone schedule Datalogging Mode: The WEB600 has two modes of data logging for each zone: Continuous or While In Alarm.

  • Page 27: Chapter 4: User Programming

    Chapter 4: User Programming CHAPTER 4: USER PROGRAMMING This chapter explains how to setup User accounts including Username, Password, Access Level, Escalation Level, Schedules, and Contact methods. To begin, click on Profiles from the menu bar. The following screen will appear: User Programming Screen The WEB600 allows you to have up to 8 User Profiles.

  • Page 28: Contact Programming

    WEB600 User’s Manual User Programming Screen Alarm Delivery Schedule: This weekly schedule sets the time period(s) when alarm delivery will be active for the selected User. The schedule is divided into half-hour increments over the seven weekdays. A check mark indicates that alarm delivery is active for that time period. Schedule Programming Screen CONTACT PROGRAMMING The WEB600 allows you to program up to 4 Contacts per User.

  • Page 29: Sms-Text Message Programming

    Chapter 4: User Programming SMS-TEXT MESSAGE PROGRAMMING To configure a SMS-Text Message choose SMS-Text Message from the drop-down list and enter your telephone number in the field below. Choose your wireless provider from the drop-down list. Configure the Contact Schedule if desired. SNMP TRAP To configure an SNMP Trap choose SNMP Trap from the drop-down list and enter your SNMP Server Name or IP address in the field below.

  • Page 30: Chapter 5: History

    WEB600 User’s Manual CHAPTER 5: HISTORY This chapter explains how to query the Event and Data Log History. The Event Log is a time-stamped list of system events such as System Startup, Alarm Detection, Message Delivery, … The Data Log con- tains time stamped records of the input values.
  • Page 31 Chapter 5: History Alternatively you can Export the results to a file for viewing in another program. Choose the Export file format from the drop-down list (XML, CSV, TXT) and click the Export button to create a file. Datalog screen...

  • Page 32: Chapter 6: Operation

    WEB600 User’s Manual CHAPTER 6: OPERATION Once you have finished installing and programming the WEB600 the unit is fully operational. Be sure to test each sensor to make sure your alarm messages will be delivered as expected. Below is a description of how the internal logic handles alarm message delivery for enabled inputs.

  • Page 33: Return-To-Normal Alarm Messages

    The reset time must be set high enough to allow all enabled escalation levels to be notified about an alarm before it is reset. Sample Alarm Message – (E-mail format): From: Sensaphone WEB600 ACME Widgets Monitoring System Oak & Pine St - Hatfield, PA High Alarm detected on Zone 1: Server Room Temp Alarm occurred on Sunday, February 8, 2009 at 9:18:27pm It is now 87.1F...

  • Page 34: Chapter 7: Output Programming

    WEB600 User’s Manual CHAPTER 7: OUTPUT PROGRAMMING The WEB600 includes a relay output that can be used to control a light, siren, or other low voltage device when an alarm occurs. To program the output click Outputs from the main menu. The following screen will appear: Click on the Output text in the list to display the configuration screen (see below): The Output can operate in Manual mode - which simply means you can turn the relay on and off...
  • Page 35 Chapter 7: Output Programming RELAY OUTPUT WIRING The WEB600 includes an SPST relay output that can be used to turn on a light, siren, or other device whenever an alarm occurs. The output is a normally open dry contact that can be used for low voltage switching.

  • Page 36: Appendix A: Weekly Testing Procedure

    Humidity sensors: Raise the humidity around the sensor by holding a cup of very hot water beneath the sensor. 2.) Allow the unit to contact all programmed profiles. This will make sure that the Sensaphone is pro- grammed properly. It will also prepare personnel to respond appropriately when they receive a message from the Sensaphone.

  • Page 37: Appendix B: Accessories

    Appendix B: Accessories APPENDIX B: ACCESSORIES The sensors listed below are available from Sensaphone, and represent the most commonly used zone devices. Other dry contact sensors, designed for more specialized applications, may also be used. Commercial or industrial electrical supply houses can provide devices to monitor virtually any condi- tion.

  • Page 38: Appendix C: Modbus® Specifications

    WEB600 User’s Manual APPENDIX C: MODBUS® SPECIFICATIONS Inputs TYPE VALID RANGE BASE OFFSET Input Calibration (fixed-point integer) sint16 ±300 .00 4x10496 Normal Logging Frequency (max 31 days) uint32 0 - 2678400 s . 4x10500 Alarm Logging Frequency (max 31 days) uint32 0 - 2678400 s .
  • Page 39 Appendix C: Modbus® specifications Call escalation priority level uint8 0x00 - 0xFE 4x00769 The user’s full name string 0 - 32 characters 4x00772 Username for login string 0 - 16 characters 4x00796 Password for login string 0 - 16 characters 4x00812 Profile Schedule 42-byte array...

  • Page 40: Modbus® Notes

    WEB600 User’s Manual Automatic daylight saving time adjustment TRUE or FALSE 0x00256 Reset the datalogger TRUE 0x00257 Reset the eventlogger TRUE 0x00258 System time (string) string Any Time >= 2009 3x00256 MODBUS® NOTES MODBUS® ADDRESSES Address Ranges The Modbus® address ranges are laid out according to the following color-coded table. The format below is TxDDDDD where “T”...
  • Page 41 Appendix C: Modbus® specifications Contacts The contact number is as follows: BASE + (OFFSET * ((PROFILE_NUMBER * 6) + CONTACT_NUMBER)) Contact 1 = 0 Contact 2 = 1 Contact 3 = 2 Contact 4 = 3 Network BASE System BASE Quick Access Table The following is a quick access table to retrieve the word-access, read-only current input values as human-readable ASCII strings.
  • Page 42 WEB600 User’s Manual NON-GENERIC DATA Timestamps Timestamps can be decoded using the following equations. “div” means integer division where the remainder is dropped. “mod” means the “modulus” or “remainder”. All values start at “0”. For example, Day 0 is the first day of the month and Month 0 is January.
  • Page 43 Appendix C: Modbus® specifications Contact Types: Contact Type Description Email or SMS SNMP Trap Modbus® Configuration: Operating Mode Description Modbus® Disabled Read-Only Read-Write Bit Representation Description Big-Endian Byte Order Little-Endian Word Order (Modbus® Default) Big-Endian Byte Order Big-Endian Word Order (Network Byte Order) Little-Endian Byte Order Little-Endian Word Order (Intel Byte Order) Summary Web Page Display Mode...

  • Page 44: Appendix D: Specifications

    WEB600 User’s Manual APPENDIX D: SPECIFICATIONS ALERT ZONES Number of Zones: 6 Zone Connector: terminal block Zone Types: N.O./N.C. contact, 2.8K Thermistor ( -109° to 115ºF, -85º to 57ºC ) And 10K Thermistor (-87° to 168°F; -66° to 76°C), and 4-20mA (-80,000.0 to 80,000.0 Zone Characteristics: 28.7KΩ...

  • Page 45: Power Supply

    Appendix D: Specifications POWER SUPPLY Power Supply: 120VAC/5VDC 50/60Hz 6W wall plug-in transformer w/6’ cord. Power Consumption: 2 Watts Power Protection: Metal Oxide Varistor Battery Backup: Optional 2hr battery backup module (Part #FGD-W610-B). ENVIRONMENTAL Operating Temperature: 32–122° F (0–50° C) Operating Humidity: 0–90% RH non-condensing Storage Temperature: 32°–140°...

  • Page 46: Appendix E: Oid Information

    WEB600 User’s Manual APPENDIX E: OID INFORMATION WEB 600 OID INFO ZONE INFORMATION ZONE NAMES .1.3.6.1.4.1.8338.1.1.4.1.1.1.3.15 ZONE 1 Name .1.3.6.1.4.1.8338.1.1.4.1.1.1.4.15 ZONE 2 Name .1.3.6.1.4.1.8338.1.1.4.1.1.1.5.15 ZONE 3 Name .1.3.6.1.4.1.8338.1.1.4.1.1.1.6.15 ZONE 4 Name .1.3.6.1.4.1.8338.1.1.4.1.1.1.7.15 ZONE 5 Name .1.3.6.1.4.1.8338.1.1.4.1.1.1.8.15 ZONE 6 Name .1.3.6.1.4.1.8338.1.1.4.1.1.1.1.15 Internal Power Name .1.3.6.1.4.1.8338.1.1.4.1.1.1.2.15 Battery Name ZONE LABEL UNITS .1.3.6.1.4.1.8338.1.1.4.1.1.1.3.19 ZONE 1 LABEL UNITS...
  • Page 47 Appendix E: OID Information ZONE RECOGNITION TIME (IN SECONDS) .1.3.6.1.4.1.8338.1.1.4.1.1.1.3.16 ZONE 1 RECOGNITION TIME .1.3.6.1.4.1.8338.1.1.4.1.1.1.4.16 ZONE 2 RECOGNITION TIME .1.3.6.1.4.1.8338.1.1.4.1.1.1.5.16 ZONE 3 RECOGNITION TIME .1.3.6.1.4.1.8338.1.1.4.1.1.1.6.16 ZONE 4 RECOGNITION TIME .1.3.6.1.4.1.8338.1.1.4.1.1.1.7.16 ZONE 5 RECOGNITION TIME .1.3.6.1.4.1.8338.1.1.4.1.1.1.8.16 ZONE 6 RECOGNITION TIME .1.3.6.1.4.1.8338.1.1.4.1.1.1.1.16 Internal Power RECOGNITION TIME .1.3.6.1.4.1.8338.1.1.4.1.1.1.2.16 Battery RECOGNITION TIME ZONE RESET TIME (IN SECONDS) .1.3.6.1.4.1.8338.1.1.4.1.1.1.3.17 ZONE 1 RESET TIME...
  • Page 48 WEB600 User’s Manual REAL TIME ZONE VALUES .1.3.6.1.4.1.8338.1.1.4.1.1.1.3.48 ZONE 1 REAL TIME VALUE .1.3.6.1.4.1.8338.1.1.4.1.1.1.4.48 ZONE 2 REAL TIME VALUE .1.3.6.1.4.1.8338.1.1.4.1.1.1.5.48 ZONE 3 REAL TIME VALUE .1.3.6.1.4.1.8338.1.1.4.1.1.1.6.48 ZONE 4 REAL TIME VALUE .1.3.6.1.4.1.8338.1.1.4.1.1.1.7.48 ZONE 5 REAL TIME VALUE .1.3.6.1.4.1.8338.1.1.4.1.1.1.8.48 ZONE 6 REAL TIME VALUE .1.3.6.1.4.1.8338.1.1.4.1.1.1.1.48 Internal Power REAL TIME VALUE .1.3.6.1.4.1.8338.1.1.4.1.1.1.2.48 Battery REAL TIME VALUE REAL TIME ZONE VALUES WITH LABEL...
  • Page 49 Appendix E: OID Information ZONE MAXIMUM VALUES .1.3.6.1.4.1.8338.1.1.4.1.1.1.3.41 ZONE 1 MAXIMUM VALUE .1.3.6.1.4.1.8338.1.1.4.1.1.1.4.41 ZONE 2 MAXIMUM VALUE .1.3.6.1.4.1.8338.1.1.4.1.1.1.5.41 ZONE 3 MAXIMUM VALUE .1.3.6.1.4.1.8338.1.1.4.1.1.1.6.41 ZONE 4 MAXIMUM VALUE .1.3.6.1.4.1.8338.1.1.4.1.1.1.7.41 ZONE 5 MAXIMUM VALUE .1.3.6.1.4.1.8338.1.1.4.1.1.1.8.41 ZONE 6 MAXIMUM VALUE .1.3.6.1.4.1.8338.1.1.4.1.1.1.1.41 Internal Power MAXIMUM VALUE .1.3.6.1.4.1.8338.1.1.4.1.1.1.2.41 Battery MAXIMUM VALUE ZONE ENABLED .1.3.6.1.4.1.8338.1.1.4.1.1.1.3.21 ZONE 1 ENABLED/DISABLED...
  • Page 50 WEB600 User’s Manual ZONE TABLE LOW .1.3.6.1.4.1.8338.1.1.4.1.1.1.3.13 ZONE 1 TABLE LOW .1.3.6.1.4.1.8338.1.1.4.1.1.1.4.13 ZONE 2 TABLE LOW .1.3.6.1.4.1.8338.1.1.4.1.1.1.5.13 ZONE 3 TABLE LOW .1.3.6.1.4.1.8338.1.1.4.1.1.1.6.13 ZONE 4 TABLE LOW .1.3.6.1.4.1.8338.1.1.4.1.1.1.7.13 ZONE 5 TABLE LOW .1.3.6.1.4.1.8338.1.1.4.1.1.1.8.13 ZONE 6 TABLE LOW ZONE TABLE HIGH .1.3.6.1.4.1.8338.1.1.4.1.1.1.3.14 ZONE 1 TABLE HIGH .1.3.6.1.4.1.8338.1.1.4.1.1.1.4.14 ZONE 2 TABLE HIGH .1.3.6.1.4.1.8338.1.1.4.1.1.1.5.14 ZONE 3 TABLE HIGH .1.3.6.1.4.1.8338.1.1.4.1.1.1.6.14 ZONE 4 TABLE HIGH...

  • Page 51: Datalogger

    Appendix E: OID Information CURRENT ZONE TYPE .1.3.6.1.4.1.8338.1.1.4.1.1.1.3.92 ZONE 1 TYPE .1.3.6.1.4.1.8338.1.1.4.1.1.1.4.92 ZONE 2 TYPE .1.3.6.1.4.1.8338.1.1.4.1.1.1.5.92 ZONE 3 TYPE .1.3.6.1.4.1.8338.1.1.4.1.1.1.6.92 ZONE 4 TYPE .1.3.6.1.4.1.8338.1.1.4.1.1.1.7.92 ZONE 5 TYPE .1.3.6.1.4.1.8338.1.1.4.1.1.1.8.92 ZONE 6 TYPE .1.3.6.1.4.1.8338.1.1.4.1.1.1.1.92 Internal Power TYPE .1.3.6.1.4.1.8338.1.1.4.1.1.1.2.92 Battery TYPE DATALOGGER ZONE DATALOG NORMAL INTERVAL (IN SECONDS) .1.3.6.1.4.1.8338.1.1.4.1.1.1.3.4 ZONE 1 NORMAL INTERVAL .1.3.6.1.4.1.8338.1.1.4.1.1.1.4.4 ZONE 2 NORMAL INTERVAL .1.3.6.1.4.1.8338.1.1.4.1.1.1.5.4 ZONE 3 NORMAL INTERVAL...

  • Page 52: Profile Information

    WEB600 User’s Manual GAUGE HIGH SETTING .1.3.6.1.4.1.8338.1.1.4.1.1.1.3.34 ZONE 1 GAUGE HIGH .1.3.6.1.4.1.8338.1.1.4.1.1.1.4.34 ZONE 2 GAUGE HIGH .1.3.6.1.4.1.8338.1.1.4.1.1.1.5.34 ZONE 3 GAUGE HIGH .1.3.6.1.4.1.8338.1.1.4.1.1.1.6.34 ZONE 4 GAUGE HIGH .1.3.6.1.4.1.8338.1.1.4.1.1.1.7.34 ZONE 5 GAUGE HIGH .1.3.6.1.4.1.8338.1.1.4.1.1.1.8.34 ZONE 6 GAUGE HIGH PROFILE INFORMATION PROFILE ENABLED .1.3.6.1.4.1.8338.1.1.4.1.1.1.1.21 PROFILE 1 ENABLED/DISABLED .1.3.6.1.4.1.8338.1.1.4.1.1.1.2.21 PROFILE 2 ENABLED/DISABLED .1.3.6.1.4.1.8338.1.1.4.1.1.1.3.21 PROFILE 3 ENABLED/DISABLED...

  • Page 53: Appendix F: Thermistors

    Appendix F: Thermistors APPENDIX F: THERMISTORS 2.8K THERMISTOR DATA Degrees Celsius Resistance (Ohms) 187,625 94,206 49,549 27,180 15,491 9,142 5,572 3,498 2,256 1,491 1,009 10K THERMISTOR DATA Degrees Celsius Resistance (Ohms) 441.3K 239.8K 135.2K 78.91K 47.54K 29.49K 18.79K 12.25K 8,194K 5,592 3,893 2,760...
  • Page 54 WEB600 User’s Manual...

  • Page 55: Appendix G: Returning The Unit For Repair

    In the event that the WEB600 does not function properly, we suggest that you do the following: 1) Record your observations regarding the WEB600’s malfunction. 2) Call the Technical Service Department at 610-558-2700 prior to sending the unit to Sensaphone for repair.

  • Page 56: Appendix H: Test Log

    WEB600 User’s Manual APPENDIX H: TEST LOG Alarms...
  • Page 57 Appendix H: Test Log Alarms...

Table of Contents