Sensaphone IMS-1000 Firmware Upgrade Document

Infrastructure monitoring system

Hide thumbs Also See for IMS-1000:

Table of Contents

Download this manual

SENSAPHONE

IMS- 1 000

Infrastructure Monitoring System

The upgrade package has no prerequisites and supersedes all other upgrade or software fix

packages previously distributed. Unpredictable results may occur if you do not follow the

upgrade procedure completely.

Firmware Upgrade Notice

and

Upgrade Procedures

Equipment Firmware

IMS-1000

Release Date October 15, 2014

™

1.6.154.137

Table of Contents

Need help?

Do you have a question about the IMS-1000 and is the answer not in the manual?

Page 1 Infrastructure Monitoring System Firmware Upgrade Notice Upgrade Procedures Equipment Firmware IMS-1000 1.6.154.137 Release Date October 15, 2014 The upgrade package has no prerequisites and supersedes all other upgrade or software fix packages previously distributed. Unpredictable results may occur if you do not follow the...
Page 2 IMS-1000 Embedded Firmware Feature and Correction Summary Version 1.6.154.137 (October 15, 2014) • Corrected an issue which potentially allowed a bogus datalog record to be recorded instead of an event log record. Version 1.5.197.244 (June 3, 2014) • Added support for the IMS External Temperature Sensor (IMS-4816).
Page 3 • Required to be installed before installing any newer versions. Version 1.0.89.60 (June 9, 2008) • Changed the subject line for e-mails containing camera snapshots to display “IMS-1000”. • Corrected an issue which caused camera alarm response programming changes to not take effect.
Page 4 3) Check to see if a newer version is available by going to www.sensaphone.com and clicking Support then IMS-1000. Compare the version installed in your unit to that posted on the web page. Download the new file to your computer if you would like to install the upgrade.