Nexcom (M)PPC-120T-BT-01 User Manual page 67

Chapter 4: BIOS Setup
AMI Graphic Output Protocol Policy
This section is used to configure the graphics controller settings.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced
Unknown Device
AMI Console Splitter Driver
BIST Enable [Disabled]
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
BIST Enable
Enables or disables the BIST (Built-in-Self-Test) on the integrated display
panel.
Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.
USB Configuration
This section is used to configure the USB.
Starts or stops the BIST on the
integrated display panel.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Legacy USB Support
Enable Enables Legacy USB.
Auto
Disable Keeps USB devices available only for EFI applications.
XHCI Hand-off and EHCI Hand-off
This is a workaround for OSs that does not support XHCI hand-off and EHCI
Hand-off. The XHCI and EHCI ownership change should be claimed by the
XHCI and EHCI driver respectively.
52
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced
USB Configuration
USB Module Version 8.11.02
USB Devices:
1 Keyboard, 1 Mouse, 1 Point, 1 Hub
Legacy USB Support [Enabled]
[Enabled]
XHCI Hand-off
EHCI Hand-off [Disabled]
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
Disables support for Legacy when no USB devices are connected.
Enables Legacy USB support.
AUTO option disables legacy
support if no USB devices are
connected. DISABLE option will
keep USB devices available
only for EFI applications.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
(M)PPC-080T-BT-01 and (M)PPC-120T-BT-01/02 User Manual