Transport And Storage; Surface Treatment; Dismantling/Repackaging; Disposal - Pilous ARG 220 D Instruction Manual

1. Transport and Storage

The machine may be transported and lifted only with a fork lift truck. USING A CRANE IS NOT PERMITTED!
Standard accessories:
1 bimetallic saw blade M 42 (mounted)
1 band saw operating instructions
1 hydraulic unit operating instructions

1.1. Surface Treatment

The machine components are protected against corrosion with powder stoving varnish or a primer and a two-component
polyurethane varnish. The sliding surfaces are provided with anticorrosive oil. The other machine components are zinc coated or
blackened.
1.2. Packaging
The basic packaging element is a wooden frame which according to the kind of dispatch may be a crating or a seaworthy case.
Approximately 100 mm distance from the ground should be provided for transport and loading with a fork lift truck. The machine is
packed in a stretching foil protecting against weather influences during transport.
1.3. Dismantling / Repackaging
empty and clean the metal chip tank and the coolant tank • clean the machine • apply anticorrosive oil on the sliding surfaces •
disconnect the machine from supply • fix the band saw for transport • lift the machine and screw on the wooden frame • observe the
distance of approx. 100 mm for the transport with the fork lift truck • make sure that all protective enclosures of the machine are in
place and screwed on • add the machine accessories

1.4. Disposal

When the machine has been put out of operation once for all, it should be disposed of in accordance with the rules in force in the
respective country. We recommend to contact a company specialized in waste disposal.
DANGER OF DAMAGE!
Warning: Used coolants are special waste!
The disconnecting of the machine from supply may be carried out only by electrically
qualified persons!