Arg 300 D(F)-Nc Automat - Pilous ARG 220 D Instruction Manual

4.4. ARG 300 D(F)-NC Automat

The maximum length of a single feed is 500
mm. The extraordinarily sturdy design
including the feeding system enables
cutting of heavy workpieces of big
sections. The so called "floating" design of
the feeding vice guarantees also accurate
feeding of rough workpieces. The required
workpiece length is easily set with a hand
lever and displayed on the digital meter.
Two cutting speeds 35 and 70 m/min. The
ARG 300 DF-NC Automat is equipped with
a more powerful motor and a frequency
changer allowing for setting optimum saw
blade speed between 15 and 90
m/min.The optimum setting of saw blade
speed towards the workpiece increases
the productivity of the machine and the saw
blade life.
A Hydraulic unit
B Saw blade
C Saw blade tension
D Gearbox
E Motor
F Fixed vice
G Moving vice
H Base
I Coolant tank
with pump
J Control board
K Auxiliary roller
L Moving jaw
M Moving guide bar clamp lever
N Limit switch
O Fixed guide bar
with saw blade guide
P Moving guide bar
with saw blade guide
Q Band saw head stroke cam
R Fixed vice
hydraulic cylinder
S Moving vice
hydraulic cylinder
T Workpiece feed
hydraulic cylinder
U Band saw head hydr. cylinder
V Supplementary measuring
W
Roller conveyor
X Angle scale
Y Rotary table
Z
Table arresting lever
J
V
S
G
N
C
M
R
Y
Z
H
I
P F B L X
T
W
K
A
(inside)
O U N Q N D E