Pilous ARG 220 D Instruction Manual page 26

Description of VISION 120 Control Unit
ARG 220 D(F)-NC Automat
CONTROL SYSTEM ACTIVATION
Band Saw
Model NC
SETTING OF COMMUNICATION LANGUAGE
SETTING
1 - Language Czech
Operating hours: 08:19:25
MAIN MENU
MAIN MENU
1 START
2 Kerf
3 Setting
4 Move to initial position
MATERIAL KERF
Kerf is being
performed.
Please wait.
Switching on the hydraulic unit, activate the VISION 120 control
system. NC or F-NC models and PILOUS sign will be displayed. If the
buttons
information is displayed, the display is switched over to communication
language setting and machine operating hours. If not, the display
automatically switches over to MAIN MENU or MANUAL MODE.
Use button 1 to set one of the programmed languages (Czech,
1 Language
English, German etc.).
Operating hours Machine operating hours total.
0 Switch over Press button 0 to switch over to manual mode.
to manual mode
1 START Press button 1 - the machine starts to work acc. to parameters set in
advance.
2 Kerf
Press button 2 - the machine clamps the workpiece with the moving
vice, cuts off its end, the band saw head travels in the upper position,
the moving vice opens, the fixed vice remains clamped.
3 Setting Press button 3 to switch over to Setting Workpiece Parameters.
4 Move to initial Press button 4 to open the fixed vice after the kerf has been made. (This
position function is used, if you do not want to continue the automatic cycle after
making the kerf.
Insert the workpiece end by hand under the saw blade and press the button 2 in the MAIN
MENU. T he machine clamps the workpiece with the moving vice, cuts off its end, the band saw
head travels in the upper position, the moving vice opens, the fixed vice remains clamped.
MAIN MENU is shown on the display.
and are pressed simultaneously while the a.-m.