Pilous ARG 220 D Instruction Manual page 38

Description of VISION 230 Control Unit
ARG 250 C-NC, ARG 250 CF-NC, ARG 300 C-NC, ARG 300 CF-NC
4
4
CONTROL SYSTEM ACTIVATION
Band Saw
Model CNC
SETTING OF COMMUNICATION LANGUAGE
Setting
F1 - Language: Czech
F2 - Length unit: mm
Global correction: - 0,2 mm
Operating hours: 08:19:25
MAIN MENU
MAIN MENU
F1 START
F2 Kerf
F3 Setting
F4 Move to initial position
4
MATERIAL KERF
Kerf is being
performed.
Please wait.
Switching on the hydraulic unit, activate the VISION 230 control
system. C-NC or CF-NC models and PILOUS sign will be displayed. If
the push buttons
m. information is displayed, the display is switched over to
communication language setting and machine operating hours. If not,
the display automatically switches over to MAIN MENU or MANUAL
MODE.
Use button F1 to set one of the programmed languages (Czech,
F1 Language
English, German etc.).
F2 Length unit Use button F2 to set the length in mm or inches.
F6 Global correction Press button F6 to set correction and confirm with
correction adjusting the machine tolerances. It is preset by the
manufacturer. We recommend that you discuss the setting with the
manufacturer or the dealer.
Operating hours Machine operating hours total.
F1 START Press button F1 - the machine starts to work acc. to parameters set
in advance.
F2 Kerf
Press button F2 - the machine clamps the workpiece with the moving
vice, cuts off its end, the band saw head travels in the upper position,
the moving vice opens, the fixed vice remains clamped.
F3 Setting Press button F3 to switch over to Setting Workpiece Parameters.
F4 Move to initial
Press button F4 to open the fixed vice after the kerf has been made.
position
(This function is used, if you do not want to continue the automatic cycle
after making the kerf.
Insert the workpiece end by hand under the saw blade and press button F2 in the
MAIN MENU. The machine clamps the workpiece with the moving vice, cuts off its
end, the band saw head travels in the upper position, the moving vice opens, the fixed
vice remains clamped. MAIN MENU is shown on the display.
and are pressed simultaneously while the a.-
4
. It is the internal