Loading Factory Default; Using The Web Interface; Directly On The Camera - GeoVision GV-VD120D Quick Start Manual

Vandal Proof IP Dome (Part IV)
4

4.6 Loading Factory Default

4.6.1 Using the Web Interface

You can restore factory default settings through the Web interface. For
details, refer to 1.5.1 Using the Web Interface.

4.6.2 Directly on the Camera

Use a pin to press and hold the default button for about 8 seconds .
Release the default button when the status LED blinks. For details, see
1.5.2 Directly on the Camera.
Figure 4-23
81