Connecting The Camera - GeoVision GV-VD120D Quick Start Manual

4.4 Connecting the Camera

1. Use a standard network cable to connect the camera to your network.
2. Optionally connect a speaker and an external microphon
3. O ptionally connect a monitor using a Video Out wire. Enable this
function by selecting your signal format at the TV Out field on the
Web interface. See 4.1.1 Video Settings, GV-IPCam Firmware
Manual.
4. O ptionally connect to input / output devices. For details, see 4.5 I/O
C onnector.
5. C onnect power using one of the following methods:

Plug the power adapter to power port.

Use the Power over Ethernet (PoE) function and the power will be
provided over the network cable.
6. Th e status LED of the camera will be on.
Vandal Proof IP Dome (Part IV)
4
Figure 4-22
e.
79