Loading Factory Default; Using The Web Interface; Directly On The Camera - GeoVision GV-VD120D Quick Start Manual

Vandal Proof IP Dome (Part III)
3
3.5 Loading Factory Default

3.5.1 Using the Web Interface

You can restore factory default settings through the Web interface. For
details, refer to 1.5.1 Using the Web Interface.

3.5.2 Directly on the Camera

Insert a thin object into the default button next to the camera lens. Press
and hold the default button for about 5 seconds to load the factory default.
For details, see 1.5.2 Directly on the Camera.
Figure 3-15
58