Dome Set / Camera Set - LG RNOE-B501A Owner's Manual

Audio Set
> Audio Encoding: Select the audio encoding type.
> Audio Sample Rate: Select audio sample rate.
> Audio Control Type: Select audio control type. Active audio input
select [LineIn], passive input select [MicIn].
> Volume Value: Adjust volume value by moving an adjustment bar.
It range from 1 to 100.
> Audio Denoising: To delete the noise from voice, adjust audio
denoising value by moving an adjustment bar.
It range from 1 to 9.
• Save: Save all the setup.
Note:
It needs restart after revise parameter.
Key Region
To have better image quality for some regions on the video, there are 4
regions settable for each video.
> Stream: Select the stream you want.
Note:
This mode is not supported on 3rd stream.
> Upgrade Level: Select upgrade level.
> Start to Draw: Click the [Start to Draw] button to draw the key
region on the video by using a mouse.
> Line Clear: Click the [Line Clear] button to clear the lines.
> Delete Area: Click the [Delete Area] button to delete the drawn
regions.
• Save: Save all the setup.
Operation and settings

Dome Set / Camera Set

Image Set
Set video image parameter in this page.
> Current Template: Choose the template that need to be modified.
The system provides 8 video templates for different application,
all the video parameter can only be revised and saved in the
template.
> Template Name: Input template name.
Image Adjustment
> Adjust the brightness, contrast, saturation, hue and sharpness of
image by moving a adjustment bar.
Exposure Set (RNZE-B501A only)
> Auto Exposure Speed: Setup exposure speed by moving an
adjustment bar.
> Exposure: Select a Exposure mode.
> Max Exposure Time: Setup max exposure time by moving an
adjustment bar.
Note:
If exposure time is too long, the image of moving objects will be
slured, and if exposure time too short, the image color will be
more black.
> Max Aperture Set: Select the max aperture set from the list.
> Max Gain Set: Adjust max gain value that affect image
brightness.
Note:
When gain value is too high, It will produce much noises.
> Target Brightness: Adjust the brightness of image by moving an
adjustment bar.
23