LPT-EP500_ENG
12/24/07
Introduction
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-6
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-12
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
•
•
•
•
Wall mount . . . . . . . . . . . . . . . . . . . . . . . . . . .8
•
•
•
Connections . . . . . . . . . . . . . . . . . . . . . . . . .13-18
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . .19-31
Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
1:34 PM
Page 3
32
About Dome Camera
The dome cameras are designed for installation in an
indoor or outdoor video surveillance system.
The camera incorporates the digital signal processor,
pan/tilt mechanism, x27 zoom lens and RS-485 com-
munication interface in a compact outdoor enclosure.
A newly developed 1/4" CCD makes the camera
suitable for use under extremely low illumination con-
ditions as well as in daylight.
Setup menus allow the camera to perform surveil-
lance tasks by such means as motion detection, digi-
tal flip, pattern-recording and privacy zones.
Features
High Sensitivity Support
x x
The camera provides the high quality picture with
1/4" Super HAD CCD.
Preset Position
x x
Preset position is the function to register camera
monitoring positions (preset positions) associated
with position numbers. By entering the position
numbers, you can move cameras to the preset
positions.
A maximum of 128 Preset Position is available.
The moving speed and holding time are
adjustable.
Preset Tour
x x
You can tour all preset positions that has already
been registered.
Preset Group Tour
x x
You can create a preset group using the preset
positions that has already been registered (maxi-
mum 9 groups) and you can tour the preset posi-
tion within the group.
A preset group should have a maximum of 8 pre-
set positions.
3