LG RNOE-B501A Owner's Manual page 24

Exposure Set (RNOE-B501A only)
> Shutter: Setup max exposure time by moving an adjustment bar.
Note:
If exposure time is too long, the image of moving objects will be
slured, and if exposure time too short, the image color will be
more black.
> Gain: Adjust max gain value that affect image brightness.
Note:
When gain value is too high, It will produce much noises.
> Brightness: Adjust the brightness of image by moving an
adjustment bar.
> Auto Aperture: Set the auto aperture function to enable or
disable.
> Auto Exposure Speed: Setup exposure speed by moving an
adjustment bar.
Focus Set (RNZE-B501A only)
> Focus Set: Select an appropriate Focus Mode.
> Min. Focus Distance: Select an appropriate distance.
Day/Night Switch (RNZE-B501A only)
> Smart IR: Switch the [Smart IR] function. This function is in IR
camera, when image has over exposured, camera will turn down
the brightness to avoid invisible object phenomenon according to
over exposure.
> Day/Night: Select Day/Night mode.
> Sensitivity: You can set the sensitivity value. Higher value means
more sensitive.
24
Back Light set (RNZE-B501A only)
> WDR: Select WDR mode.
- Close: Disable WDR mode.
- BackLight compensation: Set the apheliotropic area by
clicking the checkbox.
-
WDR Auto: Setup the WDR function to automatically. Drag
the slider of [Super-wide dynamic grade] to setup WDR level
fit for environment.
-
WDR Manual: Set the WDR function to manually. Drag the
slider of [Super-wide dynamic grade] to setup WDR level fit
for environment.
> BLC: To set the BLC function, check [Set Apheliotropic Area].
> HLC: Set the HLC (High Light Control) function to enable or
disable. It mainly used in transportation. When turn on the [HLC],
highlight of car' s headlight will be suppressed.
Back Light set (RNOE-B501A only)
> WDR: Select WDR mode.
- Close: Disable WDR mode.
- BackLight compensation: Set the apheliotropic area by
clicking the checkbox.
-
WDR Auto: Setup the WDR function to automatically. Drag
the slider of [Super-wide dynamic grade] to setup WDR level
fit for environment.
-
WDR Manual: Set the WDR function to manually. Drag the
slider of [Super-wide dynamic grade] to setup WDR level fit
for environment.
> HLC: Set the HLC (High Light Control) function to enable or
disable. It mainly used in transportation. When turn on the [HLC],
highlight of car' s headlight will be suppressed.
Operation and settings