Remove Config (RNZE-B501A only)
You can remove saved configurations. Select options you want to delete
configurations and click [Clear] to delete the configurations.
Remove Config (RNZE-B501A only)
It shows current status information.
Operation and settings
D/N Set (Day and Night Setting) (RNOE-B501A only)
Setup IP camera to switch in day and night with different rules.
> Realtime Brightness: Shows realtime brightness value of video.
> Color to B/W Type:
-
Auto(inside): Camera detects the video image automatically.
Video will become color when brightness value higher than
day value; Video will become gray when brightness value
lower than night value.
-
B/W: Video is always in gray mode.
-
Color: Video is always in color mode.
-
Auto(outside): Device detects outside environment
brightness with photoreceptor. Video will become color when
outside brightness value higher day value; Video will become
gray when outside brightness value lower than night value.
(Only for IR camera)
-
Schedule: User can adjust the time of day and night.
-
Self-adaptive: In color mode, IPC will detect and analysis the
brightnesss by internal synchronization sensor.
When the brightness is lower than the setted night
brightness ,the image will change into B/W in [B/W] mode.
In color mode, IPC will detect and analysis the brightnesss by
external synchronization Photoresistor. When the brightness
is higher than the setted daylight brightness, the image will
change into color.
27