Mask Alarm - LG RNOE-B501A Owner's Manual

Alarm Output
> Output Port: Select the output port.
> Mode Set: Select the mode set ON or OFF.
> Delay Time(s): Select the delay time.
• Save: Save all the set up.
Motion Alarm
> Check the [Enable] box to enable [Motion Alarm]. Then draw
the area by dragging mouse left button. Click [Delete Region] to
clean the draw area.
> Sensitivity: It range from 0 to 100. Small value means the higher
sensitivity.
> Schedule: Set the date and time. It only alarm during the
schedule.
> Link Type
- Alarm Output
-
Link Snap
• Save: Save all the setup.
Operation and settings

Mask Alarm

When the video is covered, system will alarm according to the sensitivity
setting.
> Check the "Enable" box to enable Video Occlusion Detection
function.
> Sensitivity: Smaller number means more sensitive.
> Schedule: Video Occlusion Detection works only during this
schedule time.
> Link Type
-
Alarm Output
-
Link PTZ
-
Link Snap
• Save: Save all the setup.
Email Alarm
After this function is enabled, the alarm server will automatically send
email to the setting email address when alarm is triggered.
> Check the 'Email Alarm Enable' box to enable this function.
> Email Server: Address format should be "smtp.xx.com" . XX Stand
for email server such as "smtp.gmail.com" .
> Email Port: Default number is 25.
> Email Account : Enter the email account for sending email.
> Email Password: Enter the email password for the sending email.
> Encryption: Select encryption mode.
> Email Subject: Input the email subject.
> Email Address: Set the email address. It is for the receiving email.
• Save: Save all the setup.
• Test: Test email alarm function.
39