Related Manuals for LG LT303
Summary of Contents for LG LT303
-
Page 1: Dome Camera
Dome Camera Owner’s Manual MODEL: LT303 Before installing and using the camera, please read this owner's manual carefully and retain for future reference. - Page 2 • A suitable conduit entries, knock-outs or glands CAUTION shall be provided in the cable entries of this prod- RISK OF ELECTRIC SHOCK uct in the end user. DO NOT OPEN • Caution: Danger of explosion if battery is incor- rectly replaced.
-
Page 3: Important Safety Instructions
European representative: 11. Only use attachments/accessories specified by LG Electronics Service Europe B.V. the manufacturer. Veluwezoom 15, 1327 AE Almere, The 1. Use only with the cart, stand, tripod, bracket,... -
Page 4: Table Of Contents
Contents Reference ..............9 Specifications ............29 Introduction ...............5 About Dome Camera ..........5 Features ..............5 Safety Precautions ..........6 Identification of Camera ........7 Installation ..............8 Installation Precautions .........8 Removing the Protection Tape ......8 Mounting the Camera ...........9 Dipswitch Setting ..........11 Camera ID Setting ..........12 Connections ............15 Precautions ............15 Connection preview ..........15... -
Page 5: Introduction
Privacy Mask Introduction Privacy zone feature enables users to veil unwant- ed zones. This setting is used for masking unwant- ed zones, hiding them from display on the monitor screen. Up to 8 zones can be registered. About Dome Camera Auto Pan The camera has an Auto Pan function that enables to keep surveillance on every detail occurring... -
Page 6: Safety Precautions
Day & Night Function Rapid temperature fluctuation due to frequent • This camera can be selected Color or Black & door opening and closing. White. You can set Color in the daytime and Black Use in an environment where eyeglasses •... -
Page 7: Identification Of Camera
Identification of Camera a Camera mounting bracket b Dome camera body c Dome cover assembly d Video output cable with BNC connector Connects with the video connector of the monitor. e Power cable (DC 1V) “A” f Data Communication Port (RJ45) - RS-485 and Alarm Input g Data Communication Port (RJ45) - RS-485 and Alarm Input... -
Page 8: Installation
About Static Electricity Removal Installation Before installing the camera, touch a metal case or other metallic parts with your hand to remove static electricity from your body. Do not install in areas subjected to high amounts of Installation Precautions humidity or dust. Doing so may cause internal components to damage The following steps of installation and connection work more easily or malfunction. -
Page 9: Mounting The Camera
Note: When you install the cam- era to the ceiling mount, you must drill a hole in the camera body as shown right. (ø5.0) Pendant mount (Optional) Install pipe and camera as shown below. Mounting the Camera The figures show an example of the camera mounted on a ceiling or wall with a locally procured bracket. - Page 10 2. Install the pipe and camera as shown below. Add thread sealing tape Note: The pipes and brackets for mounting are not supplied. Reference: Specifications of LG Standard pipe. Note: Do not remove the block (A) to keep the gap (B) between the camera body and installation bracket.
-
Page 11: Dipswitch Setting
(ON OFF OFF OFF) Reserved 12 (OFF OFF OFF OFF) Reserved 13 Note: If you are not using the controller with LG Multix proto- col, there may be some limitation of function control. SW104 Switch position (SW101) Protocol (ON ON ON ON) -
Page 12: Camera Id Setting
The table for the camera ID setting Switch position (SW104) Baud Rate SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 OFF OFF OFF OFF OFF OFF OFF OFF (OFF OFF OFF OFF) 9,600 BPS OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF... - Page 13 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF...
- Page 14 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF...
-
Page 15: Connections
RS-485 connection Connections Use the cable that is described below for RS-485 site communication. • Shielded, twisted pair cable Precautions • Low impedance • Wire gauge size is thicker than AWG #22 (0.33 mm • The connections should be made by qualified ser- vice personnel or system installers in accordance Connecting monitor with all local codes. - Page 16 Alarm Input function Data Port Adapter This speed dome camera has a terminal that can sense the alarm signals. If the alarm sensor that has installed in a door, win- dow, safe etc. sense a touch or shock, the alarm sensor send the alarm signal to the camera and the Alarm sensors (1-4)
-
Page 17: Connecting Lkd1000 Controller
Stop auto panning and change Stop operating pattern func- While operating the observe position to the tion and change the observe Auto Pan func- While operating alarmed position then keep position to the alarmed position tion. Pattern function. observe the alarmed position. then restart the pattern function again. -
Page 18: System Connection
System Connection Connection of the data port and adapter with LKD1000 controller Note: Description Color When any peripheral is turned off and turned on again, the camera is also turned off and turned back TRX D - Orange TRX D + Yellow Caution: Do not connect the alarm connectors to the another... -
Page 19: Operation
Main Menu Sub Menu Contents Operation LOW/ D/N LEVEL MIDDLE/ HIGH 5, 10, 15, DWELL TIME Setup Menu Overview AUTO 30, 60 sec DAY/NIGHT INITIAL SET RET/TOP/ The following table shows the list of menu items and EXIT options. You can adapt the camera to your require- ments by setting up the respective items in these NIGHT menus. -
Page 20: Menu Navigation
We use the LKD1000 controller in this manual to D-EFFECT Not supported. explain the features of the LG Dome camera because COLOR of the LKD1000’s ability to control all of the LG Dome COLOR LEVEL camera’s advanced features. (For detailed controller FREEZE OFF/ ON instructions, refer to the LKD1000 Controller Manual.) -
Page 21: General Operation
General Operation Accessing setup menus To access the setup menus using the keys on a LKD1000 controller, do the following: 1. Use [In] or [Out] button to select an option then press [Open] or [Close] button. 1. Select CAM (Camera) icon in the main menu and Submenu appears on the monitor. -
Page 22: Zoom Speed Setting
Focus Distance setting Zoom Speed setting Selects the minimum shooting distance for the focus. Selects a zoom speed. Select [FOCUS DIST] option on the [FOCUS] menu, Select [ZOOM SPEED] option on the [FOCUS] then select a focus distance value (50CM, 1M, 3M, menu, then select a zoom speed (SLOW, MIDDLE or 5M). -
Page 23: Exposure Settings
Exposure settings WDR LEVEL: LOW MIDDLE HIGH BLC: Set the BLC limit. • BLC LEVEL: LOW MIDDLE HIGH Iris setting HSBLC: Use for adjusting brightness the • specific area of picture. The HSBLC mode is automatically activated only in low illuminance scene. -
Page 24: White Balance Setting
White Balance setting SHUTTER (Shutter Speed) setting Select the desired shutter speed for camera exposure. You can change the shutter speed to higher speed Select the method by which the camera shifts its to capture fast-moving subjects, though the image output colors to compensate for the color of a light becomes darker. -
Page 25: Day/Night Setting
Note: If you set the AGC to [OFF] or the SHUTTER is set to one of the SHUTTER options except AUTO on the [EXPOSURE] menu, the AUTO mode of the DAY/NIGHT function is not avail- able and [---] mark is displayed. DAY: Color mode enabled. -
Page 26: Privacy Mask Setting
Privacy Mask setting istered mask color will be changed automatically with the same color for each of group (MASK1~4, MASK5~8). This function is aiming at the protection of personal privacy, selecting a screen part black not to be dis- 3D-DNR setting played in the screen. -
Page 27: Color Setting
D-EFFECT (Digital effect) setting 2. Use [Near] or [Far] button to change a adjust the option. If you set the sharpness value to higher, This model does not support the D-EFFECT function. the image outline becomes sharp. If you set to lower value, the image outline becomes dim. -
Page 28: Language Setting
Language setting User title setting You can use the camera identification to assign a number and character to the camera (0 - 9, A-Z, a-z). Select a language for setup menu and information The USER TITLE is displayed on the upper left of the display. - Page 29 Reference Specifications NTSC (High Resolution) PAL (High Resolution) Signal System 1/4" EX-view HAD CCD Pick-Up Device 410K 470K Total Pixels No Internal Sync System x27 Zoom (F1.5 (Wide End) , F3.6 (Tele End), f = 3.25mm ~ 88 mm Lens More Than 520 TV Lines Horizontal Resolution More Than 50dB (AGC Off)
- Page 32 P/NO : MFL62034725...