LG LW130W User Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Security Camera
  5. LW130W
  6. User manual

LG LW130W User Manual

Hd compact network camera
Hide thumbs Also See for LW130W:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual , Operation & Installation Manual
User Manual
HD Compact Network Camera
Please read this manual carefully prior to use for proper usage and operation of the device.
Model
LW130W
P/N : COV31151202
1112(V1.1)

Advertisement

Table of Contents
loading

Related Manuals for LG LW130W

Summary of Contents for LG LW130W

  • Page 1 User Manual HD Compact Network Camera Please read this manual carefully prior to use for proper usage and operation of the device. Model LW130W P/N : COV31151202 1112(V1.1)

  • Page 2: Safety Instructions

    • Do not attempt to disassemble, repair, or adjust the device. Any disassembly attempts not by a qualified technicians from LG Electronics may cause fire, electric shocks, or injuries. • Do not place heavy objects on top of the device.
  • Page 3 Installation and Storage Please read and follow the instructions below carefully as you prepare for the installation of the device. • Shut down the power of the main device. • Reserve enough space for the wiring of the device when installing the product. •...
  • Page 4 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.

  • Page 5: Table Of Contents

    Device Overview & Features ........ 7 Recommended PC Requirements ....18 Connecting LG IP Device ........18 Connecting the Devices ........9 Overview of LG Smart Web Viewer ....20 Configuration of LG Network Camera ..... 23 Caution ................9 Connection Scheme ..........9 Things to Check before Reporting a Malfunction ..

  • Page 6: Product Characteristics

    With this manual, you can learn how to install and operate LG Network Camera in a networked enviroment in details. Any prior knowledge or familiarity with the network environment will be of assistance as you try to understand this manual.

  • Page 7: Device Overview & Features

    Device Overview & Features...
  • Page 8 Device Overview & Features Stand Connecting Hole Note: You can connect the camera onto a stand using this hole. Refer to the manual of the network hub or the internet service manual to find out how to use WPS. I/O Terminals If the hub is set to Shared mode, connection to the hub IN (Sensor Input) Terminal: Connect a sensor here.

  • Page 9: Connecting The Devices

    Connecting the Device Cautions • Shut down the power of the PC before connecting the device. • The following installation works and connections should be made by a qualified technician or system engineer. All relevant rules and regulations should be observed. •...

  • Page 10: Network Connections

    The product supports remote control, adjustment of the settings, or realtime monitoring of the imagery via networks. After installing the device, check your netowkr environment. Broadband Service Use an RJ-45 cable to connect your LG Network Camera to the network. Router Broadband Service...

  • Page 11: Power Supply

    Connecting the Device Power Supply Connect the device to a DC 5V power supply from the adapter as shown in the figure. (The recommended power spceification of the adaptor is DC 5V/1.5A or above.) [Adaptor Specification] Manufacturer Asian Power Devices Inc. Type / Model DA-15F05 Input: 100-240V, 50-60Hz, 0.5A...

  • Page 12: Connecting Alarming Devices

    Connecting the Device Connecting Alarming Devices The Alarm Terminals are used to connect the device with a buzzer, alarm lamp, door switches or other external alarming devices or relays. The specification of the Alarm Terminal is as follows. [Alarm Terminal Specification] Remarks Minimum Typical Maximum...

  • Page 13: Connecting The Device

    Connecting the Device IN (Sesor Input) Output (Relay Output) Connect a Sensor to the Sensor Input Terminal. Connect an alarming device (or a relay) to the Relay Output Terminal of the device. Alarming signals will be given in case of an event. Alarm (Relay) Device Note:...

  • Page 14: Inserting A Micro Sd Card

    Connecting the Device Inserting a micro SD Card You can use a micro SD card to prevent interruption of recording or monitoring even when there is a network failure. Inserting a micro SD Card 1. Open the micro SD Card Slot Cover. 2.
  • Page 15 If the card is removed without unmounting it, the data stored within the card may be compromised or the device would not work properly. LG Electronics is not responsible for the damages or the • lost data due to the improper insertion or removal of the SD card by the users.

  • Page 16: Installing The Camera

    When redirecting your camera, turn the nut cover to the left to loosen the stand from the body first before you turn the camera for a new direction. LG Electronics is not responsible for any damages on the camera due to attempts to redirect it while the fixtures are not loosened.

  • Page 17: Initial Configuration And Operation

    IN,’ click on the yellow bar on the upper margin of your • To connect to a PC, you need to install LG Client software web browser’s screen to install LG Smart Web Viewer on the machine first. Once you connect the PC with Software (which is an Active X control.)

  • Page 18: Recommended Pc Requirements

    Initial Configuration and Operation Recommended PC Requirements Connecting LG IP Device Take the following steps to connect to an LG IP device. Item Requirement 1. Install LG IPSOLUTE software. Windows XP Professional, Windows VISTA, Windows 7 2. Search for an LG IP device using IP Utility.
  • Page 19 We recommend Windows Internet Explorer for this application. 3.1 Run IP Utility software to search of any LG IP Device. • The launching of LG Smart Web Viewer may take a 3.2 Once the search result screen is up, you may either few minutes in accordance with your network condition.

  • Page 20: Overview Of Lg Smart Web Viewer

    Initial Configuration and Operation Overview of LG Smart Web Viewer...
  • Page 21 Initial Configuration and Operation Item Description Change the resolution setting of your video image. (1280x720 (16:9 mode), D1, or CIF) The factory setting is D1. Shows the video codec used in the selected video stream (Master or Slave). Switch the setting in accordance with your network connection protocol (TCP or UDP). With this check box activated, the client attempts a TCP connection to the server.
  • Page 22 To get out of the settings menu, select a video stream from the drop down list in Live View. The real time video surveillance image from the camera. Engage or disengage the audio transmission between the LG IP device and the computer. (Colored Icon: Audio link on, Grey Icon: Audio link off)

  • Page 23: Configuration Of Lg Network Camera

    You can change the settings of the cameras remotely over the network. System Configuration Click on [Configuration] in your LG Smart Web Browser to pop up the settings menu window. Caution: Any alteration of the system configuration should be carried out by a qualified technician or systems engineer.
  • Page 24 Initial Configuration and Operation Overview of the Systems Configuration Menu Menu Sub-menus User Basic Version SD Card Basic Date & Time Event Schedule System Maintenance Event Event Server Log & Report Sensor & Relay Language Camera Stream Audio & Video Audio Motion detect Basic...
  • Page 25 Initial Configuration and Operation System Version Date & Time Shows the versions of the firmware, hardware, software, and the web client of the current device. Time zone Select your time zone from the dropdown list.
  • Page 26 Initial Configuration and Operation Time mode Server time > Synchronize with NTP Server: Sets the time of the system > Server time: Displays the current date and time of the according to the Sync. Interval configuration of your IP device. system.
  • Page 27 Initial Configuration and Operation Maintenance Backup & Restore > Backup: All of the configuration items in the Settings menu can be backed up. 1. Press [Backup] button. A download message window will appear. 2. Press [Save] button. 3. Browse to the target destination folder to save the backup file and input the desired file name of the backup file.
  • Page 28 Initial Configuration and Operation Note: > Initialize: Press [Initialize] button to return your device • The backup and recovery functionalities can only work to its factory setting. But, the network settings, PTZ when the system that you will apply the backup file has protocol configuration and the presets are not initialized.
  • Page 29 Initial Configuration and Operation Audio & Video Language Camera Language list Choose the system language of LG Smart Web Viewer to display the system settings and information. • Save: Press this buttons to save the changes you made.
  • Page 30 Initial Configuration and Operation Note: Preview The Sensitivity and Shutter Speed can only be altered You may watch the changes in the video images as a result when the device is set to Manual mode. of the alterations you made in the settings as you manipulate Save: Click this button to save the changes you made.
  • Page 31 Initial Configuration and Operation > Maximum Frame rate: Select the max frame rate of the video. Note: If the bit rate is set too low, the configured FPS may > GOP size: You may alter the GOP value settings here. not be satisfied in some cases according to the data This attribute is activated only when the video codec is volume of the transmission stream.
  • Page 32 Initial Configuration and Operation > Audio type: Choose the type of audio encoding that Motion detect you wish to use. (G.711 PCMA, G.711 PCMU, G.726 24K, G.726 32K) Audio out > Enable: Activate this checkbox to activate the Audio output mode. Save: Click this button to save the changes you made.
  • Page 33 Initial Configuration and Operation Network General > Sensitivity: Set the sensitivity of the motion detector to Basic detect any moving objects in the scene. At high sensitivity, even tiny twitches in the scene can be detected as a moving object. >...
  • Page 34 Initial Configuration and Operation RTP Stream > RTSP port: The number of RTSP port for video streaming. The default value of the port number is 554, and you RTP (Real Time Transport Protocol) is an internet protocol may change this within the range from 1025 to 65535. that supports the transmission and management of the >...
  • Page 35 Initial Configuration and Operation Master / Slave Note: When using multicast, avoid using the same port number > RTP Unicast: Check this radio button when you are using with the multicast to prevent the video stream from RTP unicast. overwrapping. Also, use unique IP addresses and port >...
  • Page 36 Initial Configuration and Operation TCP/IP Note: To use this functionality, the mail server should be registered within the event server configuration. > Statically set: Manually configure the network settings. IP address: Input the IP address here. Subnet mask: Input the subnet mask address here. Gateway: Input the gateway address here.
  • Page 37 Initial Configuration and Operation DDNS IP filtering DDNS allows the user to use a URL to connect to an LG You may add up to 10 IP addresses here, either one at a IP device instead of using an IP address.
  • Page 38 Initial Configuration and Operation Note: - Deny all: Basically the access will not be granted to any IP address except for those listed in the Access Permission To apply your access granting policy (either blocking or List. To active this mode, there should be at least one opening for them) to a range of addresses, insert the or more address registered in the list.
  • Page 39 Initial Configuration and Operation Wireless Access Point > Press [Refresh] button to refresh the list of the wireless LAN access points detected around. The figures on the left show the strength of the signal, while the names of the access points are displayed on the right. >...
  • Page 40 Initial Configuration and Operation > You may use an access point you would like to use by IP Address status pressing [Add] button to add a new access point. > Automatically set with DHCP: Click on this radio button to use DHCP to automatically configure the network >...
  • Page 41 Initial Configuration and Operation User Basic User list > Take the following steps to add a new user. Basic 1. Press [Add] button to call up a User Setup window. You may add new users with varying authorities. 2. Enter the username and password of the new user. Upto 50 user IDs in total can be registered.
  • Page 42 Initial Configuration and Operation > Editing a registered user Max. Number of Streams for Simultaneous Access The password or the authorization setting of an existing Max.Number of RTP Streams for Simultaneous Access > user may be altered. Control this setting to manipulate the total number of 1.

  • Page 43: Sd Card Settings

    Initial Configuration and Operation SD Card Settings SD Card Recording > Always: Starts recording to SD cards immediately. Basic > Recurrence pattern: Automatically repeats recording to SD cards at designated time and days of the week set by the user. Note: It is not possible to set different times for different days of weeks.
  • Page 44 Initial Configuration and Operation > Network Failure Recording: Activate this checkbox to The maximum values configurable in this case are, respectively, start recording to the SD card automatically in case of 10 for the maximum frame rate, CBR for quality, and a network failure.
  • Page 45 file that would not play. To check the files recorded on the card, press [Search] button. The downloaded files can be played using LG The list of the files are only updated when this button is pressed.
  • Page 46 Initial Configuration and Operation Event Event Schedule When there is an event (a motion detected by the motion detector) the video feed is either recorded or the relay and Flash LED, alarming device will be activated.
  • Page 47 Initial Configuration and Operation Event Schedule List Note: • In order to activate ‘FTP server / SMTP server’ settings, > Editing the Event Schedule List a file server and/or mail server should be registered at 1. Select an event trigger and press [Edit] button. the event server setting sub menu under the event menu.
  • Page 48 Initial Configuration and Operation Event Server FTP Server List An FTP server receives the recorded video clips. Event servers are used to receive the recorded video clips or notification messages. > To add an FTP server. 1. Press [Add] button and the FTP server configuration window will pop up.
  • Page 49 Initial Configuration and Operation > Editing an FTP server Enable SSL: Activate this setting when using SSL 1. Select the target FTP server to be edited from the list. (Secure Socket Layer) protocol. SSL protocol is an 2. Press [Edit] button. encryption protocol to provide secure communication Makes changes to setup attributes of the server.
  • Page 50 Initial Configuration and Operation Sensor & Relay IR Motion Sensor > Enable: Activate this checkbox to use an IR sensor. > Alias: Input the name of the IR sensor. Relay > Control duration: Set the relay control duration. > Alias: Input the name of the relay. >...

  • Page 51: Things To Check Before Reporting A Malfunction

    The following instructions are to help our customers solve Destination host unreachable: This means the system some of the operation errors or malfunctions when LG IP could not access to a device that is using the IP address devices do not work properly for various reasons.
  • Page 52 Things to Check before Reporting a Malfunction I want to access a device on the Local network I have a problem with the Video Streaming. from outside. • When the video is not playing on your web browser, follow the instruction on the screen to install the web •...
  • Page 53 • Check if your computer is equipped with a sound card computer. When using LG IPSOLUTE or Smart Web or other sound related components. See if you’re your Viewer, try not to use any other software in your computer.

  • Page 54: Open Source Software Disclaimer

    Open Source Software Disclaimer To obtain the source code under GPL, LGPL, MPL and LG Electronics will also provide open source code to you other open source licenses, that is contained in this product, on CD-ROM for a charge covering the cost of performing please visit http://opensource.lge.com.

  • Page 55: Product Specification

    Backlight Compensation, Exposure Control, AGC, White Balance, Sharpness Video / Audio Video Compression H.264, MJPEG Frame Rate 30 fps @ 1280 x 720 + 30 fps @ D1 Multi-Streaming Dual-Streaming Video Protocol LG Protocol, ONVIF, PSIA Audio Compression G.711, G.726 2-way Audio...
  • Page 56 Audio In/Out 1/1 (Built-in) Alarm In/Out PIR Sensor Flash LED SD Slot O (Micro) Ethernet 10/100 Ethernet Network 802.11 b/g/n (Wi-Fi) Security Password Protection, HTTPS(SSL, TLS) Protocol TCP/IP(IPv4), HTTP, HTTPS, RTP, RTSP, UDP, DHCP, FTP, SMTP, NTP, ARP, ICMP, DDNS(LG)
  • Page 57 Product Specificaiton Remote S/W Web Client Mobile Application (IPhone, Android) LG Video Management S/W Connections Misc. Power Source DC 5V Operating Temp. 0°C ~ 40°C Operating Humidity 0 % RH to 80 % RH Weight 100g Dimension (W x H x D) Body – 60 x 98 x 42 mm...
  • Page 58 RF Radiation Exposure Statement France Notice This equipment should be installed and operated with Pour la France métropolitaine minimum distance 20cm between the radiator and your 2.400 - 2.4835 GHz (Canaux 1à 13) autorisé en usage body. intérieur Italy Notice 2.400 -2.454 GHz (canaux 1 à...
  • Page 59 Address LG Electronics Inc. 19-1, Cheongho-ri, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do, 451-713, Korea Product Details Product and Model Name HD Compact Network Camera LW130W Applicable Regulation and Standards Details 1. EMC Directives : 2004/108/EC EN 55022:2006/A1:2007 Class B EN 50130-4:1995+A2:2003 EN 61000-3-2:2006+A2:2009 EN 61000-3-3:2008 2.
  • Page 60 Doo Haeng Lee / Director Oct 25, 2011 declaration relates complies with the above mentioned standards, regulation and directives LG Electronics Inc. – EU Representative Veluwezoom 15, 1327 AE Almere, The Netherlands Signature of representative...

Table of Contents