LG RNOE-B501A Owner's Manual page 25

White Balance
> White Balance: Select white balance mode according to the
actual scene. If you select [Semi-auto] or [Handle], you can
adjust red and blue balance to meet demand.
(R is red gain, B is blue gain.)
Image Enhancement
> Image Style: Select image style.
> Indoor / Outdoor: Select indoor or outdoor mode.
> Defog: Set the defog function to enable or disable. If you select
the [Enable], you can adjust [Defog] strength value by dragging
slider.
> Digital Noise Reduction (DNR): Digital noise reduction
- Close: Disable DNR mode.
- Ordinary Mode: You can adjust [Denoise Level] by dragging
slider.
-
Expert Mode: You can adjust [Space-Domain Denoise] and
[Time-Domain Denoise] by dragging slider.
Note:
Please click [Save] after settings.
• Export: Click [Export] to export current HD parameter template to
certain place (Default address is D:\NetVideoBrowser\HDPara.dat).
This template can be used for other same model cameras.
• Import: Click [Import] to import HD parameter setting file from
default address (Default address is D:\NetVideoBrowser\ HDPara.
dat), to achieve quick configuration.
• Default: When you click the [Default], each template parameters will
restored to factory default settings.
Operation and settings
Schedule
User can setup the device to get best images in different time period. It
provides maximum 8 time periods.
To setup schedule for each time periods, check the time line and select
the image mode. To adjust templite time, drag the dividing line. Different
color means different schedule.
• Export: Click [export] export current image schedule to certain place
(default address D:\NetVideoBrowser\ HDSchedulePara.dat ), this
template can be used for other same model cameras.
• Import: Click [import] import image schedule file from default
address(default address D:\NetVideoBrowser\ HDSchedulePara.dat),
to achieve quick configuration.
Basic Set (RNZE-B501A only)
Basic Information
> Control Speed: Set limit for the max operation speed.
> Zoom Speed Level: Zoom speed level setup the faster the manual
zoom speed.
> Temperature Control Mode: Select the temperature control
mode.
> Auto Stop-time(s): Set the time period for the stop PTZ
movement since the last operation. It can be set to be
5/15/30/60s.
> Preset Speed: Set the preset there are for selection.
> Standby Action: Check the [Enable] box to enable [Standby
Action].
> Standby Time(s): Set up the standby time.
> Power-lost Memory Mode: Automatically save the time and PTZ
setting when power is off.
> Laser : Set the Laser function to enable or disable.
• Save: Save all the setup.
25