Dome Id Setting; Language Setting; Alarm Setting; Alarm In Setting - LG LCP2850I-AN Owner's Manual

48 Operation

DOME ID setting

Displays or removes the Camera ID OSD on the screen.
1. Select [DOME ID] option on the [OSD] menu.
2. Use [Near] or [Far] button to set it [ON] or [OFF]
3. Select [RETURN] option and press [Open] or [Close]
button to exit the setting menu.

LANGUAGE Setting

4
Select a language for the setup menu and OSD display.

ALARM Setting

This camera has a terminal that can sense the alarm signals.
The camera can be programmed to go to a preset with a
signal from any connected alarm device.
.

Alarm In setting

1. Select one of the alarms in option on the [ALARM SET]
menu.
2. Use [Near] or [Far] button to set it [ON].
3. Press [Open] or [Close] button.
4. Select [NORMAL] option and select [Open] or [Close]
option.
• OPEN: Activate the alarm in the close position.
• CLOSE: Activate the alarm in the open position.
5. Select [ALARM IN(1 to 4)] option and select preset
number. When the alarm is triggered, the camera
moves to the selected preset position. The presets run
continuously until alarm source is off.
6. Select [DWELL TIME] option and then set the alarm
dwell time. The alarm is stopped after selected dwell
time.