Opening A Usb Connection To The If2 - Intermec IF2 User Manual

Chapter 4 — Managing, Troubleshooting, and Upgrading the IF2

Opening a USB Connection to the IF2

[Version]
Signature="$Windows NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%LINUX%
DriverVer=08/17/2004,0.0.2.0
; Copyright(C)2004 Al Borchers (alborchers@steinerpoint.com)
[Manufacturer]
%LINUX%=GSerialDeviceList
[GSerialDeviceList]
%GSERIAL%=GSerialInstall, USB\VID_0525&PID_A4A7
[DestinationDirs]
DefaultDestDir=10,System32\Drivers
[GSerialInstall]
CopyFiles=GSerialCopyFiles
AddReg=GSerialAddReg
[GSerialCopyFiles]
usbser.sys
[GSerialAddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,usbser.sys
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
56
• You can restore default settings. For help, see
defaults via a serial connection" on page 62.
• You can open a BRI session.
If you are connecting the IF2 using a USB connection, you need:
• a USB cable.
• to create a folder with a gserial.inf and a usbser.sys file.
To connect to the IF2 using the USB port
1 Create a folder to place the gserial.inf and usb.sys file in.
2 Click Start > Programs > Accessories > Notepad.
3 In Notepad, copy and paste the following text:
"To restore
IF2 Network Reader User's Manual