About Rfid Services; Configuring Bri Settings; Changing Bri Attribute Settings - Intermec IF2 User Manual

Chapter 3 — Developing and Using RFID Applications

About RFID Services

Configuring BRI Settings

Changing BRI Attribute Settings

38
• The IF2 is no longer guaranteed to be the only RFID module
resource. The serial connection is one of eight possible
connections.
For more information on BRI, see the
Programmer's Reference
The RFID service sets the protocol your application uses to
communicate with the RFID module. The available services are:
• BRI (Basic Reader Interface) - Intermec proprietary protocol for
controlling the reader. To configure BRI settings, see the next
section.
• LLRP (Low-Level Reader Protocol) - EPCglobal standard for
network interfaces between the RFID reader and its controlling
software. To configure LLRP settings, see
Settings" on page 46.
This section explains how to configure BRI settings that control
reader operation and communication with your application.
• To configure BRI attribute settings that control reader operation,
such as read and write tries, tag types, or antenna settings, see the
next section, "Changing BRI Attribute Settings."
• To configure BRI server settings, which manage how your
application communicates with the reader, see
BRI Server" on page 43.
BRI attribute settings control how the IF2 reader module reads tags.
Follow the next procedure to change attribute settings.
Note: The BRI attribute settings in the web interface define the
default BRI attributes when a client initially connects to the BRI. The
settings do not change the attributes of any current BRI sessions.
Basic Reader Interface
Manual.
IF2 Network Reader User's Manual
"Configuring LLRP
"Configuring the