Rfid Applications And The If2; Using The Rfid Resource Kit - Intermec IF2 User Manual

Chapter 3 — Developing and Using RFID Applications

RFID Applications and the IF2

Using the RFID Resource Kit

36
Your application communicates with the IF2 through one of two
RFID services:
• the Basic Reader Interface (BRI) server, which controls the reader
by issuing BRI commands. For more information on the BRI
server, see "Configuring the BRI Server" on page 43.
For more information on using BRI, see the
Programmer's Reference
• the Low-Level Reader Protocol (LLRP), based on the EPCglobal
standard. For more information on LLRP settings, see
"Configuring LLRP Settings" on page 46.
For more information on LLRP, see the
Reference Guide.
The application you develop resides on a remote server which
communicates with the IF2. In this case, all processing is performed
by the server.
The Intermec Developer Library RFID Resource Kit includes Java and
C# tools you can use to develop applications that enable control of
the reader and data management.
The resource kit is available as part of the Intermec Developer Library
(IDL). To learn more about the RFID Resource Kit, go to
www.intermec.com
Software > Development Library > Developer Resource Kits.
Manual.
and choose Products > Applications and
IF2 Network Reader User's Manual
Basic Reader Interface
LLRP Programmer's