About The Intermec Ready-To-Work Indicator; Understanding The Network And Power Ports - Intermec IF2 User Manual

Chapter 1 — Getting Started

About the Intermec Ready-to-Work Indicator

Understanding the Network and Power Ports

4
The blue Ready-to-Work indicator shows when an application is
communicating with the Basic Reader Interface (BRI) server or LLRP
client on the IF2. The next table explains the different states of the
Ready-to-Work indicator.
Ready-to-Work Indicator Status Descriptions
Status Description
Off IF2 does not have power.
Blinking IF2 is initializing and not yet ready to use, or no application is
currently communicating with the IF2 BRI or LLRP server or
LLRP server.
Steady An application is communicating with the BRI server or an
LLRP client has connected to the IF2.
For more information on the BRI server, see
Server" on page 43.
The IF2 network and power ports are located under the cable cover.
GPIO port
DC power port
IF2 Network and Power Ports
"Configuring the BRI
COM 1
Ethernet port
(high power POE)
IF2 Network Reader User's Manual