Viewing The Bri Server Log - Intermec IF2 User Manual

Chapter 3 — Developing and Using RFID Applications

Viewing the BRI Server Log

44
To configure BRI server settings
1 From the menu, click RFID Services > BRI > BRI Server. The BRI
Server screen appears.
2 Change BRI server settings as needed. For help, see the next table.
3 Click Activate Changes to save your changes and immediately
make them active.
BRI Server Parameter Descriptions
Parameter Description
Enable External Enables/disables external TCP connections to the BRI
BRI Connections server. If this check box is not checked, BRI applications
will not be able to connect to the IF2.
BRI TCP Port Specifies the TCP port used for incoming connections
to the BRI server. This port must be unique for all TCP
services running on the IF2. Valid range is 2189 to
65535. Default is 2189.
Enable Logging Enables/disables logging of BRI server events.
For more information on logging, see the next section.
Enable BRI on Enables/disables sending BRI commands through the
serial port serial port.
If you enable logging, you can see a list of BRI server events. You can
save the logfile as a .txt file.
IF2 Network Reader User's Manual