Installing The If2 - Intermec IF2 User Manual

Installing the IF2

IF2 Network Reader User's Manual
To disable help text
1 In the web browser interface, click Help in the upper right corner
of the screen.
The Help screen appears.
2 Clear the Enable Help check box.
3 Click Activate Changes to save your changes and immediately
make them active. The Help text is disabled.
This section explains how to mount the IF2 to a wall using the
Network Reader Drilling Template Instructions
with the IF2.
The IF2 should be professionally installed. For more
information, contact your local Intermec representative.
To install the IF2
1 Choose a mounting location.
2 Use the IF2 Network Reader Drilling Template Instructions
holes in the mounting location.
Chapter 1 — Getting Started
IF2
that comes in the box
to drill
13