Lenovo ThinkStation p910 Hardware Maintenance Manual page 162

What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 213.
M.2 solid-state drive
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
To replace an M.2 solid-state drive, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 101.
2. Lay the computer on its side for easier access to the flex adapter slots.
3. Locate the flex adapter slots. See "Parts on the system board" on page 35.
4. Locate and remove the flex adapter on which you want to install or replace an M.2 solid-state drive. See
"Flex adapter" on page 169.
5. Open the cover of the flex adapter.
Figure 102. Opening the cover of the flex adapter
156
P910 Hardware Maintenance Manual