Lenovo ThinkStation p910 Hardware Maintenance Manual page 136

4. Install the 3.5-inch storage drive into the flex bay storage enclosure. Then, install the four screws to
secure the drive to the flex bay storage enclosure.
Figure 59. Installing the 3.5-inch storage drive to the flex bay storage enclosure
5. Slide the flex bay storage enclosure into the optical drive bay. See "Device in an optical-drive bay" on
page 107.
6. Connect the signal cable and the power cable to the new storage drive.
Figure 60. Connecting the cables to the storage drive
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 213.
2.5-inch storage drive
To install or replace a 2.5-inch storage drive, do the following:
130
P910 Hardware Maintenance Manual