Lenovo ThinkStation p910 Hardware Maintenance Manual page 129

4. Flex the bracket and align pins
2.5-inch internal storage drive. Then install a new 2.5-inch internal storage drive into the bracket. Do not
touch the circuit board
Figure 47. Installing the new 2.5-inch internal storage drive into the bracket
5. Slide the new 2.5-inch internal storage drive into the kit from the rear until the internal storage drive
snaps into position.
Figure 48. Sliding the new 2.5-inch internal storage drive into the kit
1 , 2 , 3 , and 4
5
on the internal storage drive.
on the bracket with the corresponding holes in the new
.
Chapter 9 Installing or replacing hardware
123