Lenovo ThinkStation p910 Hardware Maintenance Manual page 158

• If you are replacing a storage drive, flex the sides of the bracket to release the four pins
storage drive. Then, remove the storage drive from the bracket.
Figure 95. Removing the storage drive from the bracket
5. Keep the connector on the storage drive on the right as shown. Then, flex the sides of the bracket and
align the four pins
Note: Do not touch the circuit board (if accessible) of the 2.5-inch storage drive.
Figure 96. Installing the storage drive into the bracket
152
P910 Hardware Maintenance Manual
1
1 on the bottom of the bracket with the corresponding holes in the storage drive.
1
1 from the